Digitainer 0.8

easyVDR - >VARforumsname - >Digitainer 0.8

masterpete 07.Aug.2010 14:24:30

Hallo,

da ich noch 2 Digitainer habe, wollte ich diese auf 0.8 umrüsten, um auf allen VDRs 0.8 zu haben.

Also DVD rein und GO

Die HDD habe ich manuell gelöscht und anschließend eine automatische Installation gemacht.

Nach dem reboot habe ich ausgewählt, dass ich ein Digitainer habe und ich daher kein X+xinelibout haben möchte.

Nach erneuten Reboot kam wieder der gewohnte Bildschirm Press F1-F4 for shell and F10 to get back here oder so.

Ich erwartete mit Spannung das TV Bild ... es kam nichts...

Indianer im Anhang - hat einer eine Idee

#S1: Gigabyte GA-H77M-D3H, Intel 1610 Celeron, 4GB RAM, Cine S2 6.5 + Duoflex S4, NVIDIA GT 630, IBM SSD 240GB, Atric IR Einschalter, DVD-Brenner mit easyvdr 3 oder MLD5
#S2 (offline) POV MB-D510-MATX, 2GB, GT 220, TT 1600
#C1: RPi3 MLD5.1

masterpete 07.Aug.2010 17:20:11

ein kopieren der alten asounf.conf brachte schonmal nix :(

MFG 07.Aug.2010 17:25:20

Moin moin masterpete,

warte ja noch dass sich ein *tainer-Wissender einschaltet,
hab leider den Verdacht, dass alsa mal aktualisiert wurde,
aber dann nicht softdevice und/oder der VDR noch mal durchgemaked wurde :-\

MfG.
MFG.

Sorry, das war mal dir Hardware, nu wechselt die zu oft ;-]
P4/1.8 1024 mit VGA, 100Mbit, USB 2.0 onBoard VGA misc HDDs CDRW2100E - DXR3 EM8300 original Hollywood+ V1 - DVB-C PCI Twinhan 2021 - DVB-T USB2.0 MSI DIGIVOX II V2+3
easyVDR 0.6.08 Kernel 2.6.28.9 - testing 0.7v5, vga2scart,... ;-]

[url=http://www.easyvdr-forum.de/forum/index.php?topic=5901.0]Du Brauchen Hilfe? Wir brauchen Daten! <-> [url=http://www.easyvdr-forum.de/forum/index.php?topic=5901.0]Indianer

MFG 07.Aug.2010 15:06:23

Moin moin masterpete,

mit *tainer und softdevice leider keine Erfahrung, der Punkt wo softdevice aussteigt ist wohl:
Aug 7 14:23:16 (none) vdr: Playback open error: default, Datei oder Verzeichnis nicht gefunden FATAL exiting

MfG.
MFG.

masterpete 09.Aug.2010 10:50:32

*push*
montags müssen die Digitainer-pros ja wieder hier rein schauen :)

@MFG wenn du vllt doch weiterhelfen kannst - nur zu! :P

Webs 10.Aug.2010 22:01:37

Hallo,

ich habe genau das gleiche Problem und die gleiche Fehlermeldung.... zusätzlich habe ich folgende Info im Log gefunden:

Aug 10 21:07:04 (none) vdr: ERROR: unknown config parameter: softdevice.AlsaDevice = default

Anschließend kommt:

Aug 10 21:08:15 (none) vdr: Opening alsa device default
Aug 10 21:08:15 (none) vdr: Using alsa AC3 device hw:0,1
Aug 10 21:08:15 (none) vdr: Playback open error: default, Datei oder Verzeichnis nicht gefunden FATAL exiting

Ich bin dabei meinen Digitainer von DVB-S auf DVB-C umzustellen und habe dafür zur Version 0.8 gegriffen.

Irgendjemand eine Idee?

Viele Grüße

HW: Medion Digitainer - Celeron 850 Mhz, 512 MB RAM, WD WD2000JB, Technotrend Cable Star HD2, Pioneer DVR-106D
SW: easyVDR 0.8

Nosti 13.Aug.2010 08:01:20

na da bin ich aber mal gespannt!!

-> digitainer mit PVR unterstützung in der 0.8. ??

Server:
easyVDR: 0.6.08
Kernel: 2.6.28.9
Motherboard: D1219 FuSi
CPU: Intel(R) Celeron(TM) CPU 1300MHz
Videokarte(n): Fujitsu Siemens DVB-C (fürs EPG)
Hauppauge WinTV PVR-350 (als Ausgabe&Fernbedienung)
Hauppauge WinTV PVR-150 (normal halt)

Client: MEDION DIGITAINER II (ohne TV karte)
easyVDR: 0.6.08
Kernel: 2.6.28.9
Motherboard: MS 6723 MSI
CPU: Celeron (Coppermine)
X10 Fernbedienung

masterpete 13.Aug.2010 08:18:37

Leider hat noch keiner ne glorreiche Idee

prudentis 18.Aug.2010 09:52:49

*push*

SW: EasyVDR 0.7.24
HW: HTPC-DE02 + Asus P5QL-E, Core2 2,2 GHz, CineS2 + HDe, HD SYS=120GB 2,5" + HD-USB 1TB" # NAS 1TB, 2GB RAM Imon Multimedian IR/VFD v.6[15c2:0036]
HW2: Asus M2NPV-VM, AMD X2, 1GB Ram, IDE HD, DVB=Hauppauge HVR4000 PCI, DVD Brenner
[url=http://www.prudentis.org]prudentis.org
[url=http://wiki.easy-vdr.de/index.php/Hilfe]Du brauchst Hilfe? Wir brauchen Daten!

Webs 23.Aug.2010 23:12:21

Hallo,

hat immer noch keiner eine Idee, woran es liegen könnte?

Wenn wir das Problem eingrenzen können, ist die Lösung vermutlich nicht mehr weit. Liegt es am Softdevice?

Please help... oder gebt uns zumindest einen Hinweis, wo genau das Problem liegt.

HW: Medion Digitainer - Celeron 850 Mhz, 512 MB RAM, WD WD2000JB, Technotrend Cable Star HD2, Pioneer DVR-106D
SW: easyVDR 0.8

Dr Jones 24.Aug.2010 19:22:25

Jepp,

habe 2 Digis im Einsatz und werkle immer noch mit 0.6 rum. Wäre schon toll, wenn der Digi TS-Format lesen und schreiben könnte!

Grüße
Dr Jones

Server:
Digitainer Mainboard, 2 x 200 Gig Seagate FP, 2 x Skystar 2.6, LIRC an COM1

Client:
Digitainer Mainboard, 1 x 200 Gig Seagate FP, Streaming Client, Aufnahmen liegen über mount auf Server, FB über Skystar USB-Empfänger

UND:
Die Überzeugung, daß Easyvdr eine tolle Sache ist.

masterpete 26.Aug.2010 14:55:24

wenn man in der sysconfig \"-Psoftdevice -ao alsa:pcm=default -vo dfb:triple:cle266:viatv \" löscht startet der VDR auf jeden Fall schon mal...

ich teste weiter

Dr Jones 26.Aug.2010 17:37:31

[quote='masterpete link' pid='10222' dateline='1282827324']
wenn man in der sysconfig \"-Psoftdevice -ao alsa:pcm=default -vo dfb:triple:cle266:viatv \" löscht startet der VDR auf jeden Fall schon mal...

ich teste weiter

Damit hast Du leider NUR einen Ausfnahmevdr keinen Ausgabevdr...
Also scheint es an softdevice bzw der Hardwarebeschleunigung (cle266), dfb, viatv zu liegen....

Was passiert, wenn Du den Befehl auf

-Psoftdevice -ao alsa:pcm=default -vo dfb:viatv \

änderst?

Grüße
Dr Jones

masterpete 26.Aug.2010 19:52:29

bringt keine besserung

Nosti 26.Aug.2010 23:09:10

nabend,

ich reih mich mal ein in die versuchs digitainer...

Nosti 27.Aug.2010 08:00:31

ich sehe grade verschiedene easyinfos durch und bei der 0.8.0 fällt mir das immer wieder auf:

Aug 26 23:56:54 (none) vdr: loading plugin: /usr/vdr/plugins/libvdr-epgsearch.so.1.7.0
Aug 26 23:56:54 (none) vdr: loading plugin: /usr/vdr/plugins/libvdr-yacoto.so.1.7.0
Aug 26 23:56:54 (none) vdr: loading plugin: /usr/vdr/plugins/libvdr-setup.so.1.7.0
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/setup.conf
Aug 26 23:56:54 (none) vdr: ERROR: unknown config parameter: softdevice.AlsaDevice = default
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/sources.conf
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/diseqc.conf
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/channels.conf
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/commands.conf.de_DE
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/reccmds.conf.de_DE
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/timercmds.conf.de_DE
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/svdrphosts.conf
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/remote.conf
Aug 26 23:56:54 (none) vdr: loading /etc/vdr/keymacros.conf
Aug 26 23:56:54 (none) vdr: ERROR: unknown plugin 'hdmonitor'
Aug 26 23:56:54 (none) vdr: ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: ERROR: unknown plugin 'music'
Aug 26 23:56:54 (none) vdr: ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: ERROR: unknown plugin 'osdteletext'
Aug 26 23:56:54 (none) vdr: ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: ERROR: unknown plugin 'sport'
Aug 26 23:56:54 (none) vdr: ERROR: empty key macro
Aug 26 23:56:54 (none) vdr: ERROR: unknown plugin 'weatherng'
Aug 26 23:56:54 (none) vdr: ERROR: empty key macro
Aug 26 23:56:57 (none) vdr: video directory scanner thread started (pid=7533, tid=7533)
Aug 26 23:56:57 (none) vdr: video directory scanner thread started (pid=7534, tid=7534)
Aug 26 23:56:57 (none) vdr: no DVB device found
Aug 26 23:56:57 (none) vdr: video directory scanner thread ended (pid=7533, tid=7533)
Aug 26 23:56:57 (none) vdr: video directory scanner thread ended (pid=7534, tid=7534)
Aug 26 23:56:57 (none) vdr: initializing plugin: softdevice (0.5.0): Software-AusgabegerÃ€t
Aug 26 23:56:57 (none) vdr: init

zumindestens steht das mehr fach drin, er läd und endläd auch ständig die tvkarte (PVR150):

Aug 26 23:58:11 (none) Runvdr: DVB: Loading
Aug 26 23:58:11 (none) kernel: [ 135.612000] Linux video capture interface: v2.00
Aug 26 23:58:11 (none) kernel: [ 135.728747] ivtv: Start initialization, version 1.4.1
Aug 26 23:58:11 (none) kernel: [ 135.729341] ivtv0: Initializing card 0
Aug 26 23:58:11 (none) kernel: [ 135.729355] ivtv0: Autodetected Hauppauge card (cx23416 based)
Aug 26 23:58:11 (none) kernel: [ 135.729488] ivtv 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Aug 26 23:58:11 (none) kernel: [ 135.807489] tveeprom 0-0050: Hauppauge model 26709, rev F0C1, serial# 9585603
Aug 26 23:58:11 (none) kernel: [ 135.807498] tveeprom 0-0050: tuner model is Philips FQ1216LME MK5 (idx 121, type 80)
Aug 26 23:58:11 (none) kernel: [ 135.807504] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
Aug 26 23:58:11 (none) kernel: [ 135.807510] tveeprom 0-0050: audio processor is CX25843 (idx 37)
Aug 26 23:58:11 (none) kernel: [ 135.807514] tveeprom 0-0050: decoder processor is CX25843 (idx 30)
Aug 26 23:58:11 (none) kernel: [ 135.807518] tveeprom 0-0050: has no radio
Aug 26 23:58:11 (none) kernel: [ 135.807524] ivtv0: Autodetected Hauppauge WinTV PVR-150
Aug 26 23:58:11 (none) kernel: [ 135.835083] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
Aug 26 23:58:11 (none) kernel: [ 136.028800] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
Aug 26 23:58:11 (none) kernel: [ 136.067640] tda9887 0-0043: creating new instance
Aug 26 23:58:11 (none) kernel: [ 136.067648] tda9887 0-0043: tda988 found
Aug 26 23:58:11 (none) kernel: [ 136.083847] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
Aug 26 23:58:11 (none) kernel: [ 136.125628] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
Aug 26 23:58:12 (none) kernel: [ 136.245216] tuner-simple 0-0061: creating new instance
Aug 26 23:58:12 (none) kernel: [ 136.245227] tuner-simple 0-0061: type set to 80 (Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough)
Aug 26 23:58:12 (none) kernel: [ 136.249151] ivtv0: Registered device video0 for encoder MPG (4096 kB)
Aug 26 23:58:12 (none) kernel: [ 136.249274] ivtv0: Registered device video32 for encoder YUV (2048 kB)
Aug 26 23:58:12 (none) kernel: [ 136.249346] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
Aug 26 23:58:12 (none) kernel: [ 136.249413] ivtv0: Registered device video24 for encoder PCM (320 kB)
Aug 26 23:58:12 (none) kernel: [ 136.249418] ivtv0: Initialized card: Hauppauge WinTV PVR-150
Aug 26 23:58:12 (none) kernel: [ 136.249469] ivtv: End initialization
Aug 26 23:58:12 (none) Runvdr: DVB: Loading
Aug 26 23:58:12 (none) kernel: [ 136.324157] ivtvfb: no cards found
Aug 26 23:58:12 (none) Runvdr: CLE266-Hardware gefunden setze viafb
Aug 26 23:58:12 (none) Runvdr: starte FBTV
Aug 26 23:58:12 (none) Runvdr: start Lirc both1
.
.
.
(halt die x10)

masterpete 28.Aug.2010 14:16:33

Wieso sieht man im start der 06.xx nicht den Eintrag für das Softdevice in der sysconfig.
Ich habe 2 Digitainer und kann ja vergleichen.
Schade, dass fast keiner gute Tips hat...

Nosti 30.Aug.2010 08:14:29

in wie weit wäre denn eine ältere version von softdevice unter der 0.8.0 lauffähig?

weil so wie ich das bis jetzt so sehe, könnte das unser problem sein oder?

masterpete 30.Aug.2010 08:33:49

Wenn ich wüsste wie man das testen könnte...

sinai 30.Aug.2010 08:39:45

Die Source aus der 0.6 (/usr/local/src/VDR/PLUGINS/src) in die 0.8 kopieren, Plugin bauen und testen.

Andy

VDR 1: ASRock mit Atom J1200, NVIDIA GT610, Lüfterlos, TBS 6982 SE mit easyVDR 3.0

masterpete 30.Aug.2010 09:29:44

magste mich bitte nochmal kurz aufschlauen wohin kopieren und wie bauen - wo muss ich das alte löschen?

*** failed plugins: graphtft image osdpip reelbox remoteosd skinenigmang skinreel3 softdevice text2skin tvm2vdr xineliboutput yaepghd

sinai 30.Aug.2010 11:15:21

http://wiki.easy-vdr.de/index.php/Plugins#Einzelnes_Plugin_neu_kompilieren_.28am_Beispiel_von_calc.29

Andy

VDR 1: ASRock mit Atom J1200, NVIDIA GT610, Lüfterlos, TBS 6982 SE mit easyVDR 3.0

masterpete 30.Aug.2010 11:35:22

Danke

leider kein Erfolg:

sed: kann ../../../config.h nicht lesen: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.c:8:
softdevice.h:11:27: error: vdr/interface.h: Datei oder Verzeichnis nicht gefunden
softdevice.h:12:24: error: vdr/plugin.h: Datei oder Verzeichnis nicht gefunden
softdevice.h:13:24: error: vdr/player.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.h:15,
from softdevice.c:8:
i18n.h:12:22: error: vdr/i18n.h: Datei oder Verzeichnis nicht gefunden
In file included from audio.h:14,
from softdevice.h:16,
from softdevice.c:8:
setup-softdevice.h:14:22: error: vdr/menu.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.h:17,
from softdevice.c:8:
mpeg2decoder.h:22:28: error: vdr/ringbuffer.h: Datei oder Verzeichnis nicht gefunden
In file included from mpeg2decoder.h:25,
from softdevice.h:17,
from softdevice.c:8:
video.h:14:24: error: vdr/remote.h: Datei oder Verzeichnis nicht gefunden
In file included from mpeg2decoder.h:27,
from softdevice.h:17,
from softdevice.c:8:
VideoFilter.h:17:27: error: postprocess.h: Datei oder Verzeichnis nicht gefunden
softdevice.c:15:21: error: vdr/osd.h: Datei oder Verzeichnis nicht gefunden
softdevice.c:16:24: error: vdr/dvbspu.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.c:52:
video-dfb.h:21:24: error: vdr/thread.h: Datei oder Verzeichnis nicht gefunden
In file included from softdevice.c:114:
SoftOsd.h:27:24: error: vdr/config.h: Datei oder Verzeichnis nicht gefunden
i18n.h:14: error: ‘tI18nPhrase’ does not name a type
audio.h:42: error: ‘uchar’ has not been declared
audio.h:43: error: ‘uchar’ has not been declared
audio.h:64: error: ‘uchar’ has not been declared
audio.h:65: error: ‘uchar’ has not been declared
sync-timer.h: In constructor ‘cSigTimer::cSigTimer()’:
sync-timer.h:44: error: ‘pthread_mutex_init’ was not declared in this scope
sync-timer.h:45: error: ‘pthread_cond_init’ was not declared in this scope
sync-timer.h: In destructor ‘virtual cSigTimer::~cSigTimer()’:
sync-timer.h:49: error: ‘pthread_cond_broadcast’ was not declared in this scope
sync-timer.h:50: error: ‘pthread_cond_destroy’ was not declared in this scope
sync-timer.h:51: error: ‘pthread_mutex_destroy’ was not declared in this scope
PicBuffer.h: At global scope:
PicBuffer.h:69: error: ‘cMutex’ does not name a type
video.h:40: error: expected class-name before ‘{’ token
video.h: In constructor ‘cSoftRemote::cSoftRemote(const char*)’:
video.h:42: error: class ‘cSoftRemote’ does not have any field named ‘cRemote’
video.h: In member function ‘virtual bool cSoftRemote::PutKey(uint64_t, bool, bool)’:
video.h:46: error: ‘Put’ was not declared in this scope
video.h: At global scope:
video.h:50: error: expected class-name before ‘{’ token
video.h:68: error: ‘cMutex’ does not name a type
video.h: In member function ‘void cVideoOut::GetLockLastPic(sPicBuffer*&)’:
video.h:185: error: ‘oldPictureMutex’ was not declared in this scope
VideoFilter.h: At global scope:
VideoFilter.h:90: error: ISO C++ forbids declaration of ‘pp_mode_t’ with no type
VideoFilter.h:90: error: expected ‘;’ before ‘*’ token
VideoFilter.h:91: error: ISO C++ forbids declaration of ‘pp_context_t’ with no type
VideoFilter.h:91: error: expected ‘;’ before ‘*’ token
mpeg2decoder.h:134: error: expected class-name before ‘{’ token
mpeg2decoder.h:134: warning: ‘class cSoftRingBufferLinear’ has virtual functions but non-virtual destructor
mpeg2decoder.h: In constructor ‘cSoftRingBufferLinear::cSoftRingBufferLinear(int, int, bool)’:
mpeg2decoder.h:137: error: class ‘cSoftRingBufferLinear’ does not have any field named ‘cRingBufferLinear’
mpeg2decoder.h: In member function ‘virtual int cSoftRingBufferLinear::Available()’:
mpeg2decoder.h:140: error: ‘cRingBufferLinear’ has not been declared
mpeg2decoder.h: In member function ‘virtual int cSoftRingBufferLinear::Free()’:
mpeg2decoder.h:141: error: ‘cRingBufferLinear’ has not been declared
mpeg2decoder.h: In member function ‘int cSoftRingBufferLinear::Size()’:
mpeg2decoder.h:142: error: ‘cRingBufferLinear’ has not been declared
mpeg2decoder.h: At global scope:
mpeg2decoder.h:147: error: expected class-name before ‘{’ token
mpeg2decoder.h:161: error: ‘cMutex’ does not name a type
mpeg2decoder.h:267: error: expected class-name before ‘{’ token
mpeg2decoder.h:271: error: ‘cMutex’ does not name a type
mpeg2decoder.h:272: error: ‘cMutex’ does not name a type
mpeg2decoder.h:282: error: ‘cMutex’ does not name a type
mpeg2decoder.h:309: error: ‘offset_t’ has not been declared
mpeg2decoder.h:318: error: expected ‘,’ or ‘...’ before ‘*’ token
mpeg2decoder.h:318: error: ISO C++ forbids declaration of ‘uchar’ with no type
mpeg2decoder.h:319: error: ‘uchar’ has not been declared
mpeg2decoder.h:267: warning: ‘class cMpeg2Decoder’ has virtual functions but non-virtual destructor
softdevice.h:23: error: typedef ‘fQueuePacket’ is initialized (use __typeof__ instead)
softdevice.h:23: error: ‘cDevice’ was not declared in this scope
softdevice.h:23: error: ‘Device’ was not declared in this scope
softdevice.h:23: error: expected primary-expression before ‘*’ token
softdevice.h:23: error: ‘ic’ was not declared in this scope
softdevice.h:23: error: expected primary-expression before ‘&’ token
softdevice.h:23: error: ‘pkt’ was not declared in this scope
softdevice.h:25: error: typedef ‘SoftdeviceHandle’ is initialized (use __typeof__ instead)
softdevice.h:25: error: ‘cDevice’ was not declared in this scope
softdevice.h:25: error: ‘Device’ was not declared in this scope
softdevice.h:25: error: expected primary-expression before ‘int’
softdevice.h:25: error: expected primary-expression before ‘int’
softdevice.h:28: error: ‘fQueuePacket’ does not name a type
softdevice.h:29: error: ‘SoftdeviceHandle’ does not name a type
softdevice.h:30: error: ‘SoftdeviceHandle’ does not name a type
softdevice.h:31: error: ‘SoftdeviceHandle’ does not name a type
softdevice.h:40: error: expected class-name before ‘{’ token
softdevice.h:58: error: ISO C++ forbids declaration of ‘cOsdObject’ with no type
softdevice.h:58: error: ‘cOsdObject’ declared as a ‘virtual’ field
softdevice.h:58: error: expected ‘;’ before ‘*’ token
softdevice.h:59: error: ISO C++ forbids declaration of ‘cMenuSetupPage’ with no type
softdevice.h:59: error: ‘cMenuSetupPage’ declared as a ‘virtual’ field
softdevice.h:59: error: expected ‘;’ before ‘*’ token
softdevice.h:67: error: expected class-name before ‘{’ token
softdevice.h:94: error: ‘ePlayMode’ has not been declared
softdevice.h:101: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:101: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.h:102: error: ‘cPoller’ has not been declared
softdevice.h:105: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:105: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.h:107: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:107: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.h:126: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.h:126: error: ISO C++ forbids declaration of ‘cChannel’ with no type
softdevice.h:129: error: ISO C++ forbids declaration of ‘cSpuDecoder’ with no type
softdevice.h:129: error: expected ‘;’ before ‘*’ token
softdevice.h:132: error: ISO C++ forbids declaration of ‘cSpuDecoder’ with no type
softdevice.h:132: error: ‘cSpuDecoder’ declared as a ‘virtual’ field
softdevice.h:132: error: expected ‘;’ before ‘*’ token
softdevice.h:67: warning: ‘class cSoftDevice’ has virtual functions but non-virtual destructor
video-dummy.h:19: error: ‘cBitmap’ has not been declared
video-shm.h:68: error: expected class-name before ‘,’ token
video-shm.h:68: error: expected class-name before ‘{’ token
video-shm.h:68: warning: ‘class cShmRemote’ has virtual functions but non-virtual destructor
video-shm.h: In constructor ‘cShmRemote::cShmRemote(const char*, cShmVideoOut*)’:
video-shm.h:76: error: class ‘cShmRemote’ does not have any field named ‘cRemote’
video-shm.h:79: error: ‘Start’ was not declared in this scope
video-shm.h: In member function ‘void cShmRemote::Stop()’:
video-shm.h:93: error: ‘Cancel’ was not declared in this scope
video-dfb.h: At global scope:
video-dfb.h:94: error: expected class-name before ‘,’ token
video-dfb.h:94: error: expected class-name before ‘{’ token
video-dfb.h:94: warning: ‘class cDFBRemote’ has virtual functions but non-virtual destructor
audio-alsa.h:26: error: ‘cMutex’ does not name a type
audio-alsa.h:46: error: ‘uchar’ has not been declared
audio-alsa.h:47: error: ‘uchar’ has not been declared
audio-oss.h:17: error: ‘cMutex’ does not name a type
audio-oss.h:26: error: ‘uchar’ has not been declared
audio-oss.h:27: error: ‘uchar’ has not been declared
setup-softdevice-menu.h:17: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:22: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:31: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:36: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:45: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:50: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:58: error: expected class-name before ‘{’ token
setup-softdevice-menu.h:61: error: ISO C++ forbids declaration of ‘cPlugin’ with no type
setup-softdevice-menu.h:61: error: expected ‘;’ before ‘*’ token
setup-softdevice-menu.h:64: error: ‘eOSState’ does not name a type
setup-softdevice-menu.h:68: error: expected `)' before ‘*’ token
setup-softdevice-menu.h:58: warning: ‘class cMenuSetupSoftdevice’ has virtual functions but non-virtual destructor
SoftOsd.h:63: error: expected class-name before ‘,’ token
SoftOsd.h:63: error: expected class-name before ‘{’ token
SoftOsd.h:65: error: ‘cMutex’ does not name a type
SoftOsd.h:73: error: ‘cMutex’ does not name a type
SoftOsd.h:87: error: ‘tColor’ has not been declared
SoftOsd.h:87: error: expected ‘,’ or ‘...’ before ‘*’ token
SoftOsd.h:88: error: ISO C++ forbids declaration of ‘tColor’ with no type
SoftOsd.h:111: error: ‘cBitmap’ has not been declared
softdevice.c:116: error: expected class-name before ‘{’ token
softdevice.c:119: error: ISO C++ forbids declaration of ‘cOsd’ with no type
softdevice.c:119: error: expected ‘;’ before ‘*’ token
softdevice.c:122: error: ISO C++ forbids declaration of ‘cOsd’ with no type
softdevice.c:122: error: ‘cOsd’ declared as a ‘virtual’ field
softdevice.c:122: error: expected ‘;’ before ‘*’ token
softdevice.c:123: error: ISO C++ forbids declaration of ‘cOsd’ with no type
softdevice.c:123: error: expected ‘;’ before ‘*’ token
softdevice.c:126: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c: In constructor ‘cSoftOsdProvider::cSoftOsdProvider(cVideoOut*)’:
softdevice.c:128: error: class ‘cSoftOsdProvider’ does not have any field named ‘cOsdProvider’
softdevice.c: At global scope:
softdevice.c:133: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:139: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c: In constructor ‘cSoftDevice::cSoftDevice(int, int, char*)’:
softdevice.c:150: error: ‘spuDecoder’ was not declared in this scope
softdevice.c:188: error: ‘esyslog’ was not declared in this scope
softdevice.c:257: error: ‘class cVideoOut’ has no member named ‘Start’
softdevice.c:290: error: ‘class cVideoOut’ has no member named ‘Start’
softdevice.c: In member function ‘void cSoftDevice::LoadSubPlugin(char*, char*)’:
softdevice.c:322: error: ‘VDRVERSION’ was not declared in this scope
softdevice.c:340: error: ‘esyslog’ was not declared in this scope
softdevice.c:351: error: ‘dsyslog’ was not declared in this scope
softdevice.c:355: error: ‘esyslog’ was not declared in this scope
softdevice.c:364: error: ‘esyslog’ was not declared in this scope
softdevice.c: At global scope:
softdevice.c:382: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:382: error: ISO C++ forbids declaration of ‘cChannel’ with no type
softdevice.c:387: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:405: error: ‘bool cSoftDevice::SetPlayMode’ is not a static member of ‘class cSoftDevice’
softdevice.c:405: error: ‘ePlayMode’ was not declared in this scope
softdevice.c:406: error: expected ‘,’ or ‘;’ before ‘{’ token
softdevice.c: In member function ‘virtual void cSoftDevice::Clear()’:
softdevice.c:454: error: ‘cDevice’ has not been declared
softdevice.c: In member function ‘virtual void cSoftDevice::Play()’:
softdevice.c:461: error: ‘cDevice’ has not been declared
softdevice.c: In member function ‘virtual void cSoftDevice::Freeze()’:
softdevice.c:472: error: ‘cDevice’ has not been declared
softdevice.c: In member function ‘virtual void cSoftDevice::Mute()’:
softdevice.c:481: error: ‘cDevice’ has not been declared
softdevice.c: At global scope:
softdevice.c:490: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:490: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.c: In member function ‘virtual void cSoftDevice::StillPicture(int)’:
softdevice.c:494: error: expected primary-expression before ‘)’ token
softdevice.c:494: error: ‘Length’ was not declared in this scope
softdevice.c: At global scope:
softdevice.c:497: error: ‘bool cSoftDevice::Poll’ is not a static member of ‘class cSoftDevice’
softdevice.c:497: error: ‘cPoller’ was not declared in this scope
softdevice.c:497: error: ‘Poller’ was not declared in this scope
softdevice.c:497: error: expected primary-expression before ‘int’
softdevice.c:497: error: initializer expression list treated as compound expression
softdevice.c:498: error: expected ‘,’ or ‘;’ before ‘{’ token
softdevice.c:539: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:539: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.c:613: error: expected ‘,’ or ‘...’ before ‘*’ token
softdevice.c:613: error: ISO C++ forbids declaration of ‘uchar’ with no type
softdevice.c: In member function ‘virtual int cSoftDevice::PlayVideo(int)’:
softdevice.c:623: error: ‘Data’ was not declared in this scope
softdevice.c:623: error: ‘Length’ was not declared in this scope
softdevice.c:625: error: ‘Length’ was not declared in this scope
softdevice.c:627: error: ‘Data’ was not declared in this scope
softdevice.c:630: error: ‘Length’ was not declared in this scope
softdevice.c:632: error: ‘Data’ was not declared in this scope
softdevice.c: In member function ‘virtual const char* cPluginSoftDevice::Description()’:
softdevice.c:798: error: ‘tr’ was not declared in this scope
softdevice.c: In member function ‘virtual const char* cPluginSoftDevice::MainMenuEntry()’:
softdevice.c:803: error: ‘tr’ was not declared in this scope
softdevice.c: In member function ‘virtual bool cPluginSoftDevice::ProcessArgs(int, char**)’:
softdevice.c:918: error: ‘esyslog’ was not declared in this scope
softdevice.c:971: error: ‘esyslog’ was not declared in this scope
softdevice.c:1004: error: ‘esyslog’ was not declared in this scope
softdevice.c:1082: error: ‘esyslog’ was not declared in this scope
softdevice.c:1089: error: ‘esyslog’ was not declared in this scope
softdevice.c: In member function ‘virtual bool cPluginSoftDevice::Start()’:
softdevice.c:1154: error: ‘Phrases’ was not declared in this scope
softdevice.c:1154: error: ‘RegisterI18n’ was not declared in this scope
softdevice.c: At global scope:
softdevice.c:1173: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:1181: error: expected constructor, destructor, or type conversion before ‘*’ token
softdevice.c:1193: error: expected constructor, destructor, or type conversion before ‘;’ token
make: *** [softdevice.o] Fehler 1

prudentis 30.Aug.2010 12:05:29

Na ja, ganz so trivial ist Softdevice dann auch nicht :)

Ich würde mir mal das: http://www.vdr-wiki.de/wiki/index.php/Softdevice-plugin
und das: http://softdevice.berlios.de/
zu Gemüte führen!

Da ist noch etwas mehr zu machen als nur das Plguin mal eben durch den Kompiler zu jagen ;)

lg prudentis

MFG 30.Aug.2010 12:11:54

Moin moin masterpete,

auf jedenfall muss schon mal das Makefile noch angepasst werden, wie [url=http://www.easyvdr-forum.de/forum/index.php/topic,10579.msg84635.html#msg84635]hier prudentis aufzeigt ;-]

MfG.
MFG.

ofenheizer 30.Aug.2010 12:23:23

Braucht es nicht sowieso noch nen Kernelpatch für Softdevice? ... Stichwort: viafb

masterpete 30.Aug.2010 12:38:18

ist das nicht schon alles enthalten in der 0.8.0 - verstehe grad nur Bahnhof :)
makefile anpassen bekomme ich ja noch hin :)
aber dann wars das auch schon :/

MFG 30.Aug.2010 12:49:57

Moin moin masterpete,

fahren se' erst mal zum Bahnhof - PlugInbauen,
wenn da keine Durchsage gibt - es immer noch nicht geht,
schaun'wa waita ;-]

Gehe mal davon aus das der Kernel entsprechend gepatched wurde
- imho ging Digitainer noch mit der 0.7.1x <~ gleicher Kernel
- und softdevice ist ja im VDR auch drin.

MfG.
MFG.

masterpete 30.Aug.2010 12:53:59

hehe MFG.
Naja ich habe nun softdevice und ffmpeg neu gesaugt und make grade aber schlauer bin ich noch nicht
http://www.vdr-wiki.de/wiki/index.php/Softdevice-plugin#Softwareanforderungen

MFG 30.Aug.2010 13:09:13

Moin moin masterpete,

kannst ja erst mal zum Testen auch den VDR pur mit Softdevice aufrufen
- evtl. gibt es so mehr/klarere Informationen wo es hakt:
[code=wobei mit den Parametern für Digitainer kenn ich mich leider nicht aus ]/usr/vdr/vdr -P"softdevice -ao alsa:pcm=default -vo dfb:triple:cle266:viatv"

MfG.
MFG.

masterpete 30.Aug.2010 13:18:49

wenn man in der sysconfig testweise \"-Psoftdevice -ao dummy: -vo dfb:triple:cle266:viatv dummy aufnimmt sieht es nicht soo schlecht aus - aber startet trotzdem immer durch :(

Aug 30 13:17:00 (none) vdr: initializing plugin: softdevice (0.5.0): Software-AusgabegerÃ¤t
Aug 30 13:17:00 (none) vdr: init
Aug 30 13:17:02 (none) kernel: [ 395.603377] agpgart-via 0000:00:00.0: AGP 2.0 bridge
Aug 30 13:17:02 (none) kernel: [ 395.603400] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
Aug 30 13:17:02 (none) kernel: [ 395.603481] viafb 0000:01:00.0: putting AGP V2 device into 4x mode
Aug 30 13:17:02 (none) vdr: Supported video Modes are:
Aug 30 13:17:02 (none) vdr: Enumerating display Layers
Aug 30 13:17:02 (none) vdr: Configuring CooperativeLevel for OSD
Aug 30 13:17:02 (none) vdr: Initialising CLE266 decoder (´VÒ·´VÒ·): success!
Aug 30 13:17:02 (none) vdr: CLE266: Creating buffers for decoder
Aug 30 13:17:02 (none) vdr: CLE266: Creating buffer number 0
Aug 30 13:17:02 (none) vdr: CLE266: Creating buffer number 1
Aug 30 13:17:02 (none) vdr: CLE266: Creating buffer number 2
Aug 30 13:17:02 (none) vdr: CLE266: Creating buffer number 3
Aug 30 13:17:02 (none) vdr: CLE266: passing mpegfb_stride
Aug 30 13:17:02 (none) vdr: CLE266: passing buffers to decoder
Aug 30 13:17:02 (none) vdr: (osdLayer): flags, options, pixelformat: 0000000f, 00000000 80418c0d
Aug 30 13:17:02 (none) vdr: (osdLayer): width, height: 720 576
Aug 30 13:17:02 (none) vdr: osdLayer has alpha channel
Aug 30 13:17:02 (none) vdr: Set DLBM_TRIPLE for layer
Aug 30 13:17:02 (none) vdr: DLOP_FIELD_PARITY supported by layer
Aug 30 13:17:02 (none) vdr: Set layer to (TOP field first)
Aug 30 13:17:02 (none) vdr: surface capabilities for (scrSurface): videoonly, double-buffered, flipping, PixelFormat = 0x80418c0d
Aug 30 13:17:02 (none) vdr: width = 720, height = 576
Aug 30 13:17:02 (none) vdr: got fmt = 0x80418c0d bpp = 32
Aug 30 13:17:02 (none) vdr: Using this layer for OSD: (VIA CLE266 Graphics - )
Aug 30 13:17:02 (none) vdr: surface capabilities for (osdSurface): videoonly, double-buffered, flipping, PixelFormat = 0x00418c04
Aug 30 13:17:02 (none) vdr: Configuring CooperativeLevel for Overlay
Aug 30 13:17:02 (none) vdr: surface capabilities for (videoSurface): videoonly, PixelFormat = 0x0810060a
Aug 30 13:17:02 (none) vdr: Using this layer for OSD: VIA CLE266 Graphics
Aug 30 13:17:02 (none) vdr: Using this layer for Video out: VIA Unichrome Video
Aug 30 13:17:02 (none) vdr: Display frame time is 19998 microseconds
Aug 30 13:17:02 (none) vdr: (re)configuring Videolayer to 720 x 576 (720x576)
Aug 30 13:17:02 (none) vdr: SetParams: Enabling DLOP_FIELD_PARITY
Aug 30 13:17:02 (none) vdr: surface capabilities for (videoSurface): videoonly, flipping, triple-buffered, PixelFormat = 0x08100609
Aug 30 13:17:02 (none) vdr: (re)configured 0x08100609
Aug 30 13:17:02 (none) vdr: videoOut OK !
Aug 30 13:17:02 (none) vdr: Device opened! Using dummy device -> no audio!
Aug 30 13:17:03 (none) kernel: [ 397.197051] usbcore: deregistering interface driver lirc_atiusb
Aug 30 13:17:04 (none) Runvdr: DVB: Unloading

masterpete 30.Aug.2010 13:24:49

installiere grad neu und teste dann
war schon richtig weit grad (glaub ich) da hatte mein neu installierstes ffmepeg probleme gemacht

[quote='MFG link' pid='10222' dateline='1283166553']
Moin moin masterpete,

kannst ja erst mal zum Testen auch den VDR pur mit Softdevice aufrufen
- evtl. gibt es so mehr/klarere Informationen wo es hakt:
[code=wobei mit den Parametern für Digitainer kenn ich mich leider nicht aus ]/usr/vdr/vdr -P"softdevice -ao alsa:pcm=default -vo dfb:triple:cle266:viatv"

MfG.
MFG.

masterpete 30.Aug.2010 14:07:34

ein \"-Psoftdevice -ao dummy: -vo fb: \" brachte das auf den fernseher - kann man lesen?

masterpete 30.Aug.2010 14:11:53

[quote='MFG link' pid='10222' dateline='1283166553']
Moin moin masterpete,

kannst ja erst mal zum Testen auch den VDR pur mit Softdevice aufrufen
- evtl. gibt es so mehr/klarere Informationen wo es hakt:
[code=wobei mit den Parametern für Digitainer kenn ich mich leider nicht aus ]/usr/vdr/vdr -P"softdevice -ao alsa:pcm=default -vo dfb:triple:cle266:viatv"

MfG.
MFG.

Das brachte das ergbnis im Putty:

6:viatv"/vdr -P"softdevice -ao alsa:pcm=default -vo dfb:triple:cle26
softdevice: Created setupStoreId 655361!
softdevice: Attatched to setupStoreId 655361 at 0xb79aa000.
processing args
argv = softdevice
argv = -ao
using alsa device default
argv = -vo
enabling triple buffering
enabling CLE266 HW decoding
enabling field parity
alsa ac3Mode set to: 0
alsa AC3 device set to: hw:0,1
autodetectAspect 0
A/V Offset set to (0)
Cropping 0 lines from bottom
Cropping 0 columns from left
cropping mode set to 2 (16:9)
cropping mode set to 2 (16:9)
Cropping 0 columns from right
Cropping 0 lines from top
deinterlace method set to 0 none
Expanding 0 columns at left and right
Expanding 0 columns at top and bottom
mainMenu: 1
setting alpha blend mode to pseudo
picture mirroring set to 0 (off)
pixel format set to (I420)
shouldSuspend to: 0
syncTimerMode: usleep
UseSetSourceRectangle to off
UseStretchBlitset to off
vidBrightness: 60
vidContrast: 60
vidHue: 60
vidSaturation: 60
startup aspect set to (4:3 normal)
initializing Plugin
Initializing Video Out
ffmpeg build(3412992)
14:09:27.0017 I init
RAM: 33288192 bytes
Accellerated Functions: FillRectange DrawRectange DrawLine FillTriangle B lit StretchBlit All
Drawing Flags: Blend Xor
Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize SrcColorkey D stColorkey Deinterlace
14:09:27.0105 I Supported video Modes are:
720x576@32 640x480@8 640x480@8 640x480@8 640x480@8 640x480@8 800x600@8 800x600@ 8 800x600@8 800x600@8 800x600@8 800x600@8 800x600@8 800x600@8 1024x768@8 1024x7 68@8 1024x768@8 1024x768@8 1024x768@8 1024x768@8 1024x768@8 1152x864@8 1152x864 @8 1152x864@8 1152x864@8 1152x864@8 1152x864@8 1280x1024@8 1280x1024@8 1280x102 4@8 1280x1024@8 1280x1024@8 1600x1200@8 1600x1200@8 1600x1200@8
14:09:27.0107 I Enumerating display Layers
14:09:27.0107 I Configuring CooperativeLevel for OSD
Layer 0 VIA CLE266 Graphics Type: graphics
Caps: alphachannel brightness contrast opacity saturation src_colorkey surfac e
Layer 1 VIA Unichrome Video Type: graphics picture video
Caps: deinterlacing dst_colorkey levels field_parity opacity screen_location surface
14:09:27.0110 I Initialising CLE266 decoder (????): success!
14:09:27.0110 I CLE266: Creating buffers for decoder
14:09:27.0110 D CLE266: Creating buffer number 0
14:09:27.0111 D CLE266: Creating buffer number 1
14:09:27.0112 D CLE266: Creating buffer number 2
14:09:27.0113 D CLE266: Creating buffer number 3
14:09:27.0114 D CLE266: passing mpegfb_stride
14:09:27.0114 D CLE266: passing buffers to decoder
14:09:27.0115 I (osdLayer): flags, options, pixelformat: 0000000f , 00000000 80418c0d
14:09:27.0115 I (osdLayer): width, height: 720 576
14:09:27.0115 I osdLayer has alpha channel
14:09:27.0177 I Set DLBM_TRIPLE for layer
14:09:27.0178 I DLOP_FIELD_PARITY supported by layer [VIA Unichro me Video]
14:09:27.0180 I Set layer to (TOP field fir st)
14:09:27.0180 D surface capabilities for (scrSurface): videoonly, double-buffered, flipping, PixelFormat = 0x80418c0d
14:09:27.0180 I width = 720, height = 576
14:09:27.0181 I got fmt = 0x80418c0d bpp = 32
14:09:27.0183 I Using this layer for OSD: (VIA CLE266 Graphics - )
14:09:27.0183 D surface capabilities for (osdSurface): videoonly, double-buffered, flipping, PixelFormat = 0x00418c04
14:09:27.0183 I Configuring CooperativeLevel for Overlay
14:09:27.0235 D surface capabilities for (videoSurface): videoonl y, PixelFormat = 0x0810060a
14:09:27.0236 I Using this layer for OSD: VIA CLE266 Graph ics
14:09:27.0236 I Using this layer for Video out: VIA Unichrome Vi deo
14:09:27.0273 I Display frame time is 19998 microseconds
14:09:27.0274 D (re)configuring Videolayer to 720 x 576 (720x576)
14:09:27.0274 D SetParams: Enabling DLOP_FIELD_PARITY
14:09:27.0314 D surface capabilities for (videoSurface): videoonl y, flipping, triple-buffered, PixelFormat = 0x08100609
14:09:27.0314 D (re)configured 0x08100609
Subplugin successfully opend
Video Out seems to be OK
Initializing Audio Out
easyVDR:~#

Und auf dem TV kommt nichts weiter

EDIT: Als Test mal mit -ao dummy:
easyVDR:~# /usr/vdr/vdr -P"softdevice -ao dummy: -vo dfb:triple:cle266:viatv"
softdevice: Created setupStoreId 229377!
softdevice: Attatched to setupStoreId 229377 at 0xb795b000.
processing args
argv = softdevice
argv = -ao
argv = -vo
enabling triple buffering
enabling CLE266 HW decoding
enabling field parity
alsa ac3Mode set to: 0
alsa AC3 device set to: hw:0,1
alsa device set to: default
autodetectAspect 0
A/V Offset set to (0)
Cropping 0 lines from bottom
Cropping 0 columns from left
cropping mode set to 2 (16:9)
cropping mode set to 2 (16:9)
Cropping 0 columns from right
Cropping 0 lines from top
deinterlace method set to 0 none
Expanding 0 columns at left and right
Expanding 0 columns at top and bottom
mainMenu: 1
setting alpha blend mode to pseudo
picture mirroring set to 0 (off)
pixel format set to (I420)
shouldSuspend to: 0
syncTimerMode: usleep
UseSetSourceRectangle to off
UseStretchBlitset to off
vidBrightness: 60
vidContrast: 60
vidHue: 60
vidSaturation: 60
startup aspect set to (4:3 normal)
initializing Plugin
Initializing Video Out
ffmpeg build(3412992)
14:28:45.0700 I init
RAM: 33288192 bytes
Accellerated Functions: FillRectange DrawRectange DrawLine FillTriangle Blit StretchBlit All
Drawing Flags: Blend Xor
Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize SrcColorkey DstColorkey Deinterlace
14:28:45.0786 I Supported video Modes are:
720x576@32 720x576@32 1280x1024@32 1280x768@32 1400x1050@32
14:28:45.0787 I Enumerating display Layers
14:28:45.0787 I Configuring CooperativeLevel for OSD
Layer 0 VIA CLE266 Graphics Type: graphics
Caps: alphachannel brightness contrast opacity saturation src_colorkey surface
Layer 1 VIA Unichrome Video Type: graphics picture video
Caps: deinterlacing dst_colorkey levels field_parity opacity screen_location surface
14:28:45.0790 I Initialising CLE266 decoder (P??P??): success!
14:28:45.0791 I CLE266: Creating buffers for decoder
14:28:45.0791 D CLE266: Creating buffer number 0
14:28:45.0792 D CLE266: Creating buffer number 1
14:28:45.0793 D CLE266: Creating buffer number 2
14:28:45.0794 D CLE266: Creating buffer number 3
14:28:45.0795 D CLE266: passing mpegfb_stride
14:28:45.0795 D CLE266: passing buffers to decoder
14:28:45.0796 I (osdLayer): flags, options, pixelformat: 0000000f, 00000000 80418c0d
14:28:45.0796 I (osdLayer): width, height: 720 576
14:28:45.0796 I osdLayer has alpha channel
14:28:45.0851 I Set DLBM_TRIPLE for layer
14:28:45.0852 I DLOP_FIELD_PARITY supported by layer
14:28:45.0854 I Set layer to (TOP field first)
14:28:45.0854 D surface capabilities for (scrSurface): videoonly, double-buffered, flipping, PixelFormat = 0x80418c0d
14:28:45.0854 I width = 720, height = 576
14:28:45.0854 I got fmt = 0x80418c0d bpp = 32
14:28:45.0857 I Using this layer for OSD: (VIA CLE266 Graphics - )
14:28:45.0857 D surface capabilities for (osdSurface): videoonly, double-buffered, flipping, PixelFormat = 0x00418c04
14:28:45.0857 I Configuring CooperativeLevel for Overlay
14:28:45.0909 D surface capabilities for (videoSurface): videoonly, PixelFormat = 0x0810060a
14:28:45.0910 I Using this layer for OSD: VIA CLE266 Graphics
14:28:45.0910 I Using this layer for Video out: VIA Unichrome Video
14:28:45.0947 I Display frame time is 20000 microseconds
14:28:45.0948 D (re)configuring Videolayer to 720 x 576 (720x576)
14:28:45.0948 D SetParams: Enabling DLOP_FIELD_PARITY
14:28:45.0988 D surface capabilities for (videoSurface): videoonly, flipping, triple-buffered, PixelFormat = 0x08100609
14:28:45.0988 D (re)configured 0x08100609
Subplugin successfully opend
Video Out seems to be OK
Initializing Audio Out
Audio out seems to be OK
A/V devices initialized, now initializing MPEG2 Decoder
Fatal Error! Libavcodec library build(3419904) doesn't match avcodec.h build(3412992)!!!
Check your ffmpeg installation / the pathes in the Makefile!!!
easyVDR:~#

MFG 30.Aug.2010 14:58:23

Moin moin masterpete,

da'schau'her hab was gefunden, ist das bei Dir schon in der video.h drin?

https://lists.berlios.de/pipermail/softdevice-cvs/2009q2/000646.html

MfG.
MFG.

Was scholl da stehen - mein OCR versagt bei dem Bild "Fatal Error! Libavcodec library build(34122x4) dosen't match xxxxx.h build(34xxx"

masterpete 30.Aug.2010 15:14:51

ich habe doch gerade wieder das orginal 08.er am start
meinst du /usr/local/src/PLUGINS/softdevice-cvs-22032009/video.h v 1.58

da Steht nichts dergleichen.

aber wieder insertet man denn dinge die auskommentiert sind oder versteh ich das falsch?

MFG 30.Aug.2010 16:02:55

Moin moin masterpete,

[quote='masterpete link' pid='10222' dateline='1283174091']
aber wieder insertet man denn dinge die auskommentiert sind oder versteh ich das falsch?

ja genau wie ich, der mit C auf Kriegsfuß steht :-\
~~> http://de.wikipedia.org/wiki/C_(Programmiersprache)#Erl.C3.A4uterungen ::)
++> http://de.wikipedia.org/wiki/Pr%C3%A4prozessor#Der_C-Pr.C3.A4prozessor

MfG.
MFG.

masterpete 30.Aug.2010 16:09:05

Ah ok.
ja und nun bin ich nicht schlauer.

Jetzt müsste ich patchen und dann softdevice nochmal kompilieren?

MFG 30.Aug.2010 16:13:41

ja die Zeilen mit dem + davor, aber ohne das +, halt in die video.h einfügen und
durchmaken ;-]

Index: video.h
===================================================================
RCS file: /cvsroot/softdevice/softdevice/video.h,v
retrieving revision 1.58
retrieving revision 1.59
diff -C2 -d -r1.58 -r1.59
*** video.h 27 Feb 2009 17:02:35 -0000 1.58
--- video.h 14 Jun 2009 10:50:47 -0000 1.59
***************
*** 37,40 ****
--- 37,46 ----
#define AVRG_OFF_CNT 16

+ #if LIBAVUTIL_VERSION_INT >= (50<<16)
+ # define PIX_FMT_UYVY411 PIX_FMT_UYYVYY411
+ # define PIX_FMT_RGBA32 PIX_FMT_RGB32
+ # define PIX_FMT_YUV422 PIX_FMT_YUYV422
+ #endif
+
#ifndef STAND_ALONE
class cSoftRemote : public cRemote {

MfG.
MFG.

masterpete 30.Aug.2010 16:19:30

hum
und nen cvs auschecken geht auch nicht
cvs -z3 -d:pserver:anonymous@cvs.softdevice.berlios.de:/cvsroot/softdevice co softdevice

easyVDR:/usr/local/src/VDR# make plugins
Plugin softdevice:
make: Entering directory `/usr/local/src/PLUGINS/softdevice-cvs-22032009'
BLABLA
-DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix video.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix mpeg2decoder.c
mpeg2decoder.c: In member function ‘virtual int cAudioStreamDecoder::DecodePacket(AVPacket*)’:
mpeg2decoder.c:448: warning: ‘avcodec_decode_audio2’ is deprecated (declared at /usr/local/include/libavcodec/avcodec.h:3263)
mpeg2decoder.c:449: warning: ‘avcodec_decode_audio2’ is deprecated (declared at /usr/local/include/libavcodec/avcodec.h:3263)
mpeg2decoder.c:474: warning: ‘avcodec_decode_audio2’ is deprecated (declared at /usr/local/include/libavcodec/avcodec.h:3263)
mpeg2decoder.c:475: warning: ‘avcodec_decode_audio2’ is deprecated (declared at /usr/local/include/libavcodec/avcodec.h:3263)
mpeg2decoder.c: In member function ‘int cVideoStreamDecoder::DecodePicture_avcodec(sPicBuffer*&, int&, uint8_t*, int, int64_t)’:
mpeg2decoder.c:692: warning: ‘avcodec_decode_video’ is deprecated (declared at /usr/local/include/libavcodec/avcodec.h:3325)
mpeg2decoder.c:692: warning: ‘avcodec_decode_video’ is deprecated (declared at /usr/local/include/libavcodec/avcodec.h:3325)
mpeg2decoder.c: In member function ‘virtual int cVideoStreamDecoder::DecodePacket(AVPacket*)’:
mpeg2decoder.c:935: warning: comparison between signed and unsigned integer expressions
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix audio.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix video-dummy.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix setup-softdevice.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix setup-softdevice-menu.c
setup-softdevice-menu.c: In constructor ‘cMenuSetupSoftdevice::cMenuSetupSoftdevice(cPlugin*)’:
setup-softdevice-menu.c:374: warning: dereferencing type-punned pointer will break strict-aliasing rules
setup-softdevice-menu.c:382: warning: dereferencing type-punned pointer will break strict-aliasing rules
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix setup-softlog.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix setup-softlog-menu.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix sync-timer.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix SoftOsd.c
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix PicBuffer.c
PicBuffer.c: In function ‘bool AllocatePicBuffer(sPicBuffer*, PixelFormat, int, int)’:
PicBuffer.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
PicBuffer.c:340: warning: dereferencing type-punned pointer will break strict-aliasing rules
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -fPIC -c -DHAVE_CONFIG -DUSE_ANALOGTV -DUSE_ATSC -DUSE_CHANNELSCAN -DUSE_CMDRECCMDI18N -DUSE_CMDSUBMENU -DUSE_CUTTERLIMIT -DUSE_CUTTERQUEUE -DUSE_CUTTIME -DUSE_DDEPGENTRY -DUSE_DELTIMESHIFTREC -DUSE_DOLBYINREC -DUSE_DVBSETUP -DUSE_DVDARCHIVE -DUSE_DVLRECSCRIPTADDON -DUSE_DVLVIDPREFER -DUSE_DVLFRIENDLYFNAMES -DUSE_EM84XX -DUSE_GOTOX -DUSE_GRAPHTFT -DUSE_HARDLINKCUTTER -DUSE_JUMPPLAY -DUSE_LIEMIEXT -DUSE_LIRCSETTINGS -DUSE_LIVEBUFFER -DUSE_LNBSHARE -DUSE_MAINMENUHOOKS -DUSE_SETUP -DUSE_NOEPG -DUSE_OSDMAXITEMS -DUSE_PARENTALRATING -DUSE_PINPLUGIN -DUSE_PLUGINMISSING -DUSE_PLUGINPARAM -DUSE_ROTOR -DUSE_SETTIME -DUSE_SOFTOSD -DUSE_SOURCECAPS -DUSE_SORTRECORDS -DUSE_STREAMDEVEXT -DUSE_TIMERCMD -DUSE_TIMERINFO -DUSE_TTXTSUBS -DUSE_VALIDINPUT -DUSE_VOLCTRL -DUSE_WAREAGLEICON -DUSE_YAEPG -D__STDC_CONSTANT_MACROS -DPLUGIN_NAME_I18N='"softdevice"' -D_GNU_SOURCE -DPLUGINLIBDIR='"/usr/vdr/plugins"' -DSHM_SUPPORT -I/usr/local/src/DVB/linux/include -I/usr/local/src/VDR/include -I/usr/local/src/DVB/linux/include -D_REENTRANT -I/usr/include/directfb -I/usr/include/dfb++ -DHAVE_CLE266_MPEG_DECODER -I/usr/local/include/vidix VideoFilter.c
VideoFilter.c: In member function ‘virtual void cImageConvert::Filter(sPicBuffer*&, sPicBuffer*)’:
VideoFilter.c:288: error: invalid conversion from ‘uint8_t**’ to ‘const uint8_t**’
VideoFilter.c:288: error: initializing argument 2 of ‘int sws_scale(SwsContext*, const uint8_t**, int*, int, int, uint8_t**, int*)’
make: *** [VideoFilter.o] Fehler 1
make: Leaving directory `/usr/local/src/PLUGINS/softdevice-cvs-22032009'

MFG 30.Aug.2010 17:34:35

Moin moin masterpete,

da fehlen mir die Grundkenntnisse in C,
hoffe aber ein C-Blickender wird es lösen/erklären :(
VideoFilter.c: In member function ‘virtual void cImageConvert::Filter(sPicBuffer*&, sPicBuffer*)’:
VideoFilter.c:288: error: invalid conversion from ‘uint8_t**’ to ‘const uint8_t**’
VideoFilter.c:288: error: initializing argument 2 of ‘int sws_scale(SwsContext*, const uint8_t**, int*, int, int, uint8_t**, int*)’

//ed geht wohl hierdrum in VideoFilter.c ???
#ifdef USE_SWSCALE
sws_scale(img_convert_ctx, avpic_src.data, avpic_src.linesize,
0, orig->height, avpic_dest.data, avpic_dest.linesize);
#else

MfG.
MFG.

prudentis 30.Aug.2010 18:20:00

Also im Normalfall patch man mit dem Befehl

patch -p1
in den Sourcen des Plugins!

lg prudentis

masterpete 30.Aug.2010 18:22:58

Ja ok, aber normal müsste ich doch die cvs saugen können?
könnt ihr mal testen, ob das bei euch geht?!

prudentis 30.Aug.2010 18:40:46

Macht bei mir auch gerade zicken:

cvs -z3 -d:pserver:anonymous@cvs.softdevice.berlios.de:/cvsroot/softdevice co softdevice
cvs : unrecognized auth response from cvs.softdevice.berlios.de: cvs pserver: /cvsroot/elc/CVSROOT/config : warning: duplicate LogHistory entry found.

lg prudentis

zzzözzz 03.Sep.2010 17:30:12

cvs saugen funzt.

Das hier widerspricht der Doku von FFMPEG...
VideoFilter.c:288: error: initializing argument 2 of ‘int sws_scale(SwsContext*, const uint8_t**, int*, int, int, uint8_t**, int*)’

avpic_src.data sollte uint8_t * sein, da avpic_src vom Typ AVPicture ist:

uint8_t * [url=http://cekirdek.pardus.org.tr/~ismail/ffmpeg-docs/structAVPicture.html#92fce3ff225b920a33c1ad866f4008cb]data int [url=http://cekirdek.pardus.org.tr/~ismail/ffmpeg-docs/structAVPicture.html#2cb4ebb2fdd18b50723579eb73b9f382]linesize number of bytes per [url=http://cekirdek.pardus.org.tr/~ismail/ffmpeg-docs/structline.html]line

die aufgerufene Funktion sollte so einen header besitzen:

int [url=http://dranger.com/ffmpeg/functions.html#sws_scale]sws_scale(SwsContext *c, uint8_t *src, int srcStride, int srcSliceY, int srcSliceH, uint8_t dst, int dstStride [url=http://dranger.com/ffmpeg/functions.html#sws_scale]sws_scale([url=http://dranger.com/ffmpeg/functions.html#img_convert]img_convert_ctx, pFrame->data, pFrame->linesize, 0, is->video_st->codec->height, pict.data, pict.linesize);

Wie man sieht, ist lt. doku der zweite Parameter "uint8_t *src" anstelle von "const uint8_t *src", so dass ich denke dass einfach die verwendete FFMPEG Version zu neu ist für das cvs.

Oder einfach mal typecasten:

sws_scale(img_convert_ctx, (const uint8_t **) avpic_src.data, avpic_src.linesize,

masterpete 03.Sep.2010 17:32:17

danke wirbel für deine lösung - ich versteh es ansatzweise.
Hab ich die Chance eine ältere ffmpeg zu nutzen? Wenn ja, wie?

zzzözzz 03.Sep.2010 17:36:07

Ich würd erst mal den typecast versuchen, einfach anstelle von Zeile 287 einfügen. Wenn du FFMPEG up/downgradest musst du wahrscheinlich diverse andre libs und tools passend nachziehen (also nicht von Hand, wenn du nicht weißt was du tust..).

michel8 03.Sep.2010 19:54:22

[quote='masterpete link' pid='10222' dateline='1283527937']
danke wirbel für deine lösung - ich versteh es ansatzweise.
Hab ich die Chance eine ältere ffmpeg zu nutzen? Wenn ja, wie?

Hi masterpete,

eine etwas ältere ffmpeg-version bekommst Du auf das System, wenn Du einmal die easyvdr-confg-hde.sh durchlaufen lässt - oder besser nur das ffmpeg einspielen aus diesem script in der Konsole ausführen.
Alles erforderliche ist mit der 0.8 schon installiert.
Einen Weg zurück (also neueres ffmpeg wieder drauf) ist aber nicht möglich, hier ist eine Neuinstallation erforderlich.

Gruß
Michel

Produktiv-VDR:
msi K9N2G-Neo (nvidia 8200 onBoard) mit Athlon X2 4850e mit SamuraiZZ
2xNova-HDS2, DH102

masterpete 08.Sep.2010 17:45:45

tar -xjf /usr/bin/easyvdr/experimentell/ffmpeg-bin-0.5.tar.bz2 -C /
reicht wohl nicht oder?

michel8 08.Sep.2010 18:15:19

Doch, das sollte alleine reichen um das andere ffmpeg einzuspielen masterpete
Gruß
Michel

Produktiv-VDR:
msi K9N2G-Neo (nvidia 8200 onBoard) mit Athlon X2 4850e mit SamuraiZZ
2xNova-HDS2, DH102

masterpete 08.Sep.2010 18:33:25

leider gleiches prob wie vorher ob nur ffmpeg oder komplettes skript

michel8 08.Sep.2010 19:04:49

dann ist auch dieses ffmpeg nicht alt genug für den digitainer - sorry

Nachtrag:
Und was ist mit dem älteren Kernel, der auch noch mit in der 0.8 ist, hilft der weiter?
Michel

Produktiv-VDR:
msi K9N2G-Neo (nvidia 8200 onBoard) mit Athlon X2 4850e mit SamuraiZZ
2xNova-HDS2, DH102

masterpete 08.Sep.2010 22:26:24

beim booten einfach nen älteren wählen oder wie mach ich das?

sinai 08.Sep.2010 22:28:55

Genau.

Andy

VDR 1: ASRock mit Atom J1200, NVIDIA GT610, Lüfterlos, TBS 6982 SE mit easyVDR 3.0

Nosti 22.Sep.2010 17:18:55

gibts hier irgendeinen fortschritt in sachen digitainer und 0.8 ??

denn nen anderen kernel auswählen brachte bei mir genau das gleiche ergebnis...

masterpete 22.Sep.2010 17:56:25

bei mir nicht

Nosti 22.Sep.2010 23:01:57

wie? bei dir läufts durch? welchen punkt wählst du?

glaub es gibt 4 punkte zur auswahl... müsste das morgen nochmal versuchen!

masterpete 23.Sep.2010 06:30:30

kein fortschritt nix geht

tuxnet 03.Oct.2010 11:45:41

Schade das die 0.8 nicht auf dem Digitainer funktioniert.

VDR 1 : BM2LTS Route 66; Reelbox Avantgarde 2, 512 MB RAM, SSD HD, 2x single DVB-s2
VDR 2 : In Arbeit

masterpete 03.Oct.2010 13:04:20

würde ja gerne mal die 0.9er testen oder geht da gar nix mehr?!

sinai 03.Oct.2010 18:18:09

Ausprobieren, aber sicher nicht ootb. Da wird Handarbeit angesagt sein. Digitainer braucht doch softdevice, oder?

Andy

VDR 1: ASRock mit Atom J1200, NVIDIA GT610, Lüfterlos, TBS 6982 SE mit easyVDR 3.0

tuxnet 03.Oct.2010 19:47:41

[quote='sinai link' pid='10222' dateline='1286122689']
Ausprobieren, aber sicher nicht ootb. Da wird Handarbeit angesagt sein. Digitainer braucht doch softdevice, oder?

Andy

ja

VDR 1 : BM2LTS Route 66; Reelbox Avantgarde 2, 512 MB RAM, SSD HD, 2x single DVB-s2
VDR 2 : In Arbeit

nessie_1980 21.Jun.2011 02:07:43

Sers Leudz!

Ich besitze auch einen Digitainer und habe easyvdr 0.602 am laufen.
Wollte nun mal nachfragen ob der 0.8er geht oder nicht?

MfG
Nessie_1980

Headless-Server
HW: ASUS A7N8X-VM400, Athlon Semperon 1800+, TechnoTrend s2300 modded
SW: yaVDR 0.3

VDR-Client
HW: VIP1710, FB von der TT s2300
SW: Distri von tv-user ([url=http://www.easyvdr-forum.de/forum/index.php?topic=12317.msg101373#msg101373]Forum-Thread)

sinai 21.Jun.2011 18:45:48

Bleib bei der 0.6

Andy

VDR 1: ASRock mit Atom J1200, NVIDIA GT610, Lüfterlos, TBS 6982 SE mit easyVDR 3.0

	Kopie des easyVDR-Forums zum Nachschlagen
	Wiki Doku-Archiv Downloads Ubuntu-Pakete Sourcecode Hilfe