Digitainer and That kind of vdr ?

easyVDR - >VARforumsname - >Digitainer and That kind of vdr ?

entrr2 07.Nov.2007 21:30:07

Hello!

I'm new in this forum, and I hope you can help me.

I have a original Medion Digitainer 90012. I want to install a Vdr system. I have read in this forum that several kinds exist. I believe that I must put Easyvdr, but i have any doubts:

1.- It is necessary install first linux.
2.- It is a software with included linux
3.- He stands osd in Spanish
4.- To that install Easyvdr one I installed in a disk particion

Thanks.

wbreu 07.Nov.2007 21:40:00

Hello entrr2,

what kind of DVB-Card do you have in your Digi?

Please tell me the full Name of the card or the output of lspci.

Wolfgang

entrr2 08.Nov.2007 21:15:18

thaks wbreu for your fast answer!

but, what is it " output of lspci "

My dvb-card is Philips model, but I will try to find the model in specific out.

Thanks.

wbreu 08.Nov.2007 21:21:00

Hello again,

lspci is a command on the shell.

The card is this one: http://www.creatix.de/produkte/multimedia/ctx929.htm ?

Wolfgang

entrr2 08.Nov.2007 21:36:27

hi!

My Medion MD 90012 Digitainer have (DVB-C-/Kabel Analog-TV-Karte im Lieferumfang) and original O.S.

Thanks.

wbreu 08.Nov.2007 21:42:28

Hi again,

you must have a card that is supported under Linux.

Take a look on the card and post there the Part-Number and the Original-Code of the Designer.

or put a Link to a picture of the card in that thread.

If you have a card that is not supported under linux, you have no chance to use VDR.

Wolfgang

prudentis 09.Nov.2007 09:14:54

Hy entrr2,

and original O.S.

Are you aware that you have to download the EasyVDR Image from here ftp://ftp.gwdg.de/pub/linux/easyvdr/beta/ an Install it on your Machine to get Support from the Admins ???

Cause using the Original Software (LINSPIRE) will not help you receiving a TV Signal ;)

greets prudentis

SW: EasyVDR 0.7.24
HW: HTPC-DE02 + Asus P5QL-E, Core2 2,2 GHz, CineS2 + HDe, HD SYS=120GB 2,5" + HD-USB 1TB" # NAS 1TB, 2GB RAM Imon Multimedian IR/VFD v.6[15c2:0036]
HW2: Asus M2NPV-VM, AMD X2, 1GB Ram, IDE HD, DVB=Hauppauge HVR4000 PCI, DVD Brenner
[url=http://www.prudentis.org]prudentis.org
[url=http://wiki.easy-vdr.de/index.php/Hilfe]Du brauchst Hilfe? Wir brauchen Daten!

entrr2 09.Nov.2007 20:47:13

hi prudentis

My operating system is windows. I will try to find the kind of dvb that I have out and I tell it to you.

In this link there ara a image of my sistem

http://scr3.golem.de/screenshots/0412/digitainer/Digitainer_02.JPG

Thanks

prudentis 11.Nov.2007 08:14:08

Hy entrr2,

either using XP as Operating System, Is not an Option, getting Help here! you should realy make a Backup of your Installation. an try using the EasyVDR image instead of you XP Installation.

But beware, (as wbreu wrote you allready)If you want to use EasyVDR(Linux) you need(as far as i know) another DVB Device, because the Original Device CTX929 will not work with Linux (no Driver Support)!

check here, if your Device is Supported by Linux: http://www.linuxtv.org/wiki/index.php/DVB-S_PCI_Cards

greets prudentis

entrr2 18.Nov.2007 10:41:06

Hello and thanks for all!

I put the links of some of the photos that I do to my dvb card

http://www.subirimagenes.com/imagen-de-P1010083-1649451.html
http://www.subirimagenes.com/imagen-de-P1010084-1649457.html
http://www.subirimagenes.com/imagen-de-P1010086-1649463.html
http://www.subirimagenes.com/imagen-de-P1010087-1649466.html
http://www.subirimagenes.com/imagen-de-P1010088-1649469.html

And in oder forum I read this:

KNC1 TV Station DVR

chips: saa7134, saa6752hs, ...
pcb: E200175(2) MPEG ENCODER 1.3
tuner: FM1216ME/I H-3
connectors: FM, TV, Svideo, Composite, audio in(?)
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
.subvendor = 0x1894,
.subdevice = 0xa006,
.driver_data = SAA7134_BOARD_TVSTATION_DVR,
0000:00:11.0 0480: 1131:7134 (rev 01)
Subsystem: 1894:a006

saa7134: found at 0000:00:06.0, rev: 1, irq: 177, latency: 64, mmio: 0xdfff9c00
saa7134: subsystem: 1894:a006, board: KNC One TV-Station DVR
saa7134: board init: gpio is 830000
saa7134: i2c eeprom 00: 94 18 06 a0 06 80 00 01 00 00 00 00 00 00 01 00
saa7134: i2c eeprom 10: 00 ff 86 0e ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134: i2c eeprom 20: 01 40 01 02 02 03 01 03 06 ff 01 df ff ff ff ff
saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

from INF:
; Setting FM radio of the Silicon tuner via SIF (GPIO 21 in use/ 5.5MHz)
HKR, "Audio", "FM Radio IF",0x00010001,0x729555

from ReleaseNotes.txt:
The onboard EEPROM holding the board configuration settings, which will be evaluated by the driver, must
have programmed a '0xFF' to the entry 'ExtInfoStructureOffset2' (address 0x16, see URD file
'EEPROM_PCF8582_EUROPA.urd').Otherwise the driver-internal checksum calculation (for comparison with the
checksum inside the EEPROM) will fail and the driver will not be loaded.
Calling the 'BoardInfo' dialogue (accessible after the 'EEPROM_PCF8582_EUROPA.urd' file has been loaded
into the URD tool) will make this necessary setting during the initialization of the GUI.
...
Â· Support EIAJ audio switching (SW workaround for Saa7133 with Revision ID <0xad1021,
for >=0xad1021 HW fix is valid)Â·
Â· For SiliconTuner/FM-Radio the 2nd AddData Byte can be used to specify a different GPIO Pin than
Pin 21 (default) to enable or disable FM-Radio.
- Support for hybrid (NTSC, ATSC) tuner TUV1236D (tuner ID 0x18)

I believe that a KNC-1. Can you help me. Can you say me if my device is supported by linux.

Thanks..

prudentis 18.Nov.2007 18:55:45

Hy entrr2,

If you follow the link iÂ´ve Poste above,
you can see KNC-1 ist Supported by Linux, just take a peek here:
http://www.linuxtv.org/wiki/index.php/KNC1

Just in case, make a Backup of Your System burn it on DVD and Install Easyvdr for Testing. How about a little adventure ;)

If you need Help, let us Help you!

greets prudentis

entrr2 24.Nov.2007 12:29:36

Hi!

I input cd image in my cd-drive and rebbot medion, but when started send a missage " Disk Boot Failure, please insert sistem disk and press enter "

How can i do?, can you help me!

Thanks.

prudentis 24.Nov.2007 17:04:26

Hy entrr2,

I already had the same problem with my Digitainer, I solved it with changing to another DVD-Drive. I donÂ´t know the Reason why the Original DVD Drive sometimes didnÂ´t accept others then the Original Linspire DVD.

try changing the DVD Drive to another, and tell us the result!

greets prudentis

entrr2 24.Nov.2007 22:59:30

Hi Prudentis!

I don't have other dvd-drive.
I test change others parametres of bios, but is the same result.

There isn't another solution?

Thanks.

prudentis 25.Nov.2007 07:24:57

Hy entrr2,

as far as i know NO, my eyperience was only to change the DVD Drive! But for Installing EasyVDR itÂ´s enough to have a CD Drive as well!

Maybe some other User here or at the VDR-Portal has more ideaÂ´s, but for me itÂ´s working that way.

greets prudentis

maxx 26.Nov.2007 14:21:24

Hi,

maybe the same problem like here: [url=http://www.easy-vdr.de/forum/index.php?topic=3178.0]http://www.easy-vdr.de/forum/index.php?topic=3178.0

boot your computer with USB-keyboard plugged in -> F11 on startup -> password: am8888egh -> Advanced BIOS Futures -> MEDION CD Only: switch to

maxx

entrr2 27.Nov.2007 22:04:57

H!

Thanks maxx, but I already have one more time this action and the result is the same, the installation of easyvdr cd is not started.

Insurance that other solution exists!

poschli 30.Nov.2007 22:13:54

Hy entrr2,

test the function of the DVD ROM and the disk in another computer.
[url=http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=de_en&trurl=http%3a%2f%2fwww.easy-vdr.de%2fforum%2findex.php%3ftopic%3d3178.msg22322#msg22322]http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=de_en&trurl=http%3a%2f%2fwww.easy-vdr.de%2fforum%2findex.php%3ftopic%3d3178.msg22322#msg22322

	Kopie des easyVDR-Forums zum Nachschlagen
	Wiki Doku-Archiv Downloads Ubuntu-Pakete Sourcecode Hilfe