[SOLVED] easyVDR 3 clean Installation in NUC6i5SYK. Sound and remote problem.

easyVDR - >VARforumsname - >[SOLVED] easyVDR 3 clean Installation in NUC6i5SYK. Sound and remote problem.

jb 14.Nov.2016 13:52:30

Hi.

Till now I had an old installation of easyvdr 3.0 alpha 2 working correctly in my system. Today I updated to easyvdr 3.0 stable, but I have two issues after the first setup (may be I missundertood bad some messages during setup proccess):

- Sound is not working.
- Remote control is not working.

As I have easyinfo with the alpha and with the stable version, I upload them in order you can give some clue about what is working wrong in my new stable version.

Thanks and regards.
Javier B.
easyinfo_V3_Alpha2.zip
easyinfo_V3_Stable.zip

VDR 1: Intel NUC6i5SYK || SSD 128Gb M.2 2242 ADATA PREMIER || External HD: W.D. Elements 5 Tb || RAM: 4 Gb KINGSTON HYPERX IMPACT ? DDR4 || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || [url=http://www.easy-vdr.de/index.php]easyVdr 3.0
VDR 2: Xtreamer Ultra || HD 2 Tb || RAM: 4 Gb || Remote compatible Microsoft Media Center || 3 tuners pctv nanoStick || [url=http://www.vdr-portal.de/board16-video-disk-recorder/board99-distributionen/board96-yavdr/]yaVdr 0.6
VDR 3: Siemens Gigaset M740 AV + HD Western Digital "My Book Essential-2, 1Tb" (6 partitions ext2) || [url=http://vdr-m7x0.foroactivo.com.es]VDR-NG-EM 0.6 Pro - Rev 844

MFG 14.Nov.2016 19:41:05

Moin moin jb,

do you retried multiple the "SetupTool" via console for audi and lirc?

For audio I found this hint to update freshest alsa - especially for NUC -> [url=http://askubuntu.com/questions/843475/no-audio-ubuntu-16-04-1-on-nuc]may help
And the errors on WIFI in the syslog may be fixed by one of the firmware from [url=http://linuxwireless.org/en/users/Drivers/iwlwifi/__v91.html]here.

MfG.
...........MFG.

Sorry, das war mal dir Hardware, nu wechselt die zu oft ;-]
P4/1.8 1024 mit VGA, 100Mbit, USB 2.0 onBoard VGA misc HDDs CDRW2100E - DXR3 EM8300 original Hollywood+ V1 - DVB-C PCI Twinhan 2021 - DVB-T USB2.0 MSI DIGIVOX II V2+3
easyVDR 0.6.08 Kernel 2.6.28.9 - testing 0.7v5, vga2scart,... ;-]

[url=http://www.easyvdr-forum.de/forum/index.php?topic=5901.0]Du Brauchen Hilfe? Wir brauchen Daten! <-> [url=http://www.easyvdr-forum.de/forum/index.php?topic=5901.0]Indianer

jb 14.Nov.2016 20:44:10

Hi MFG.

[quote='MFG' pid='172796' dateline='1479148865']
do you retried multiple the "SetupTool" via console for audi and lirc?

I do not know.. may be, Could that be the cause of the issue with sound and remote control? Is there a way to solve the problem that the multiple SetupTool may have caused?

[quote='MFG' pid='172796' dateline='1479148865']
For audio I found this hint to update freshest alsa - especially for NUC -> [url=http://askubuntu.com/questions/843475/no-audio-ubuntu-16-04-1-on-nuc]may help

I thought that as with the alpha2, the audio drivers will be installed by default in the NUC. So, do I have to do this?
sudo add-apt-repository ppa:ubuntu-audio-dev/alsa-daily.
apt update.
apt install oem-audio-hda-daily-dkms
Reboot the system.

[quote='MFG' pid='172796' dateline='1479148865']
And the errors on WIFI in the syslog may be fixed by one of the firmware from [url=http://linuxwireless.org/en/users/Drivers/iwlwifi/__v91.html]here.

Well, as I have the NUC directly connected to the router I do not need the wifi drivers, so I am not worried about them... unless you tell me that it can affect to the system performance.

The remote control control is not working in this installation, but it works in the Alpha2 version, do I need also some aditional drivers?

Thanks and regards.
Javier B.

MFG 14.Nov.2016 21:02:13

Moin moin jb,

do you know, howto enter the Setup via ToolMenu to configure again?

On VDR: --- LogIn --- easyvdr / easyvdr then choose "VDR-Setup" and e.g. Audio...
Via Putty: LogIn --- easyvdr / easyvdr then choose "VDR-Setup" and e.g. Audio...

MfG.
............MFG.

jb 14.Nov.2016 23:31:37

[quote='MFG' pid='172798' dateline='1479153733']

do you know, howto enter the Setup via ToolMenu to configure again?

On VDR: --- LogIn --- easyvdr / easyvdr then choose "VDR-Setup" and e.g. Audio...
Via Putty: LogIn --- easyvdr / easyvdr then choose "VDR-Setup" and e.g. Audio...

I am sorry, do you mean in the script launched automatically after an ssh conection?

I try to enter VDR-Setup, and I receive this message:

Sie haben keine Adminrechte. Bitte erst das Passwort eingeben und dann nochmal

Google translator tells me that:
You have no admin rights. Please enter the password first and then again
But I do not know what to do :huh: . I had had entered the password when I connected.

May be it is obvious, but I am sorry, not for me. How can I enter there?

Regards.
Javier B.

Oberlooser 14.Nov.2016 23:50:18

First Ctrl,alt and F2
Login:easyvdr
Passwort:easyvdr
Then Administrator Terminal
Passwort:easyvdr and then use the Setup

Oberlooser

EA5 Test-VDR : Lintec1 Senior Gehäuse - MSI G41M-P25 Board - Intel P4 E8500 / 775 Dual Core CPU - 2x2GB DDR3 RAM - MSI GT 710 PCI-e HDMI Grafik - DVBSky S952Twin PCI-e - 120GB SSD + 1 TB Test-HDD - LG GH24NSD1 S-ATA DL DVD - USB-STM32 V2 Stick (36kHz) mit SMK RC6 MCE 50GB Fernbedienung - EasyVDR 5.0 Alpha ISO 010 - Softhddevice mit Pulseaudio + estuary4vdr OSD - Kodi 18.9 Final mit Confluence Skin - Arctic 12cm Low Noise Lüfter.
VDR-Client,s : Media MVP Scart, VIP BOX 1903, 1910 , EasyStream 0.6-18 für WIN 10, Raspberry PI 3 mit OpenElec 7.01 und TotalControl FB Code 0104 Lirc an Tsop 31238

MFG 14.Nov.2016 23:51:29

Moin moin jb,

[quote='jb' pid='172812' dateline='1479162697']
[quote='MFG' pid='172798' dateline='1479153733']

do you know, howto enter the Setup via ToolMenu to configure again?

On VDR: --- LogIn --- easyvdr / easyvdr then choose "VDR-Setup" and e.g. Audio...
Via Putty: LogIn --- easyvdr / easyvdr then choose "VDR-Setup" and e.g. Audio...

I am sorry, do you mean in the script launched automatically after an ssh conection?

I try to enter VDR-Setup, and I receive this message:

Sie haben keine Adminrechte. Bitte erst das Passwort eingeben und dann nochmal

Google translator tells me that:
You have no admin rights. Please enter the password first and then again
But I do not know what to do :huh: . I had had entered the password when I connected.

Jes Sir, that is right Point ;-]

At the ToolMenu what you see after ssh/putty/Console-Login:
at the bottom choose "Admin werden" and enter the password "easyvdr"
after this choose "VDR-Setup"
here you can restart/reconfigure all steps of the setup.

MfG.
...........MFG.

jb 15.Nov.2016 13:36:07

Hi. Thanks for the help but...

I entered in the audio setup and I obtained the msg01.jpg and msg01.jpg that I have uploaded.

Tv screen got black with a message, but no sound is played (I remember that when I installed alpha2 tv played diferent sounds).

I am sorry for the inconvenience, I am not able to find out where to change the sound output.

I tried to configure also the remote control with the setup but with no luck neither.

I do not know what exactly to ask you more or what info can I give you.

Regards.
Javier B.
msg01.jpg
msg02.jpg

jb 15.Nov.2016 13:45:55

Hi again.

I entered in the option experimental/pulse audio and it seems that I achieved get the sound working.

Thanks for your help.

Now I would need to reconfigure remote control to work. In alpha2 I had a Microsoft MCE configured. What can I do to check what is the problem with the remote?

Regards.
Javier B.

Oberlooser 15.Nov.2016 19:24:26

Hi Javier
You must Login in the vdr-setup
go to Fernbedienung and check what is your Receiver (Fb-Receiver)
after this go to Fernbedienung and take your Fernbedienung MS_MCE or
your Model .
At last reboot your VDR new.
Greetz
Oberlooser

jb 15.Nov.2016 19:56:29

[quote='Oberlooser' pid='172834' dateline='1479234266']
Hi Javier
You must Login in the vdr-setup
go to Fernbedienung and check what is your Receiver (Fb-Receiver)
after this go to Fernbedienung and take your Fernbedienung MS_MCE or
your Model .
At last reboot your VDR new.
Greetz
Oberlooser

Hi Oberlooser.

I did that this morning but it seems not to work.

Something that can be checked by other way?

Regards
Javier B

Oberlooser 15.Nov.2016 20:14:01

Hi
Can you show me your Model of Receiver or name of the Modell
and the Modell of your Remote.
Work your Keyboard ootb
Is in the BIO,s of your Mainboard the Port of your Receiver aktivated,
USB or COM Port. Com1, Com2 or Auto Mode
Greetz
Oberlooser

jb 15.Nov.2016 21:04:27

[quote='Oberlooser' pid='172841' dateline='1479237241']
Hi
Can you show me your Model of Receiver or name of the Modell
and the Modell of your Remote.
Work your Keyboard ootb
Is in the BIO,s of your Mainboard the Port of your Receiver aktivated,
USB or COM Port. Com1, Com2 or Auto Mode
Greetz
Oberlooser

Hi

I have installed the alpha2 version in a ssd hard disk and the stable version in another, I do not think the problem is about the BIOS because the remote works fine in the same NUC with de ssd of the alpha2 version and it do not work with the ssd of the stable version.

In the webportal the CIR Receiver is ITE8713_CIReceiver and the remote MS_MCE (is an One for all, configured as MS MCE). I guess it can be checked in the two easyInfo of the first post (one for each version of easyVdr).

The keyboard works fine and I can change the channels or move over the OSD.

Regards.
Javier B.

jb 16.Nov.2016 10:23:53

Hi again.

I have done another time the changes that Overlooser told me. You can see the two images uploaded on this post, but with no luck again.

I upload also on this post the list of packages installed in alpha2 version and in Stable version, just in case that can give some idea about some CIR package that is missing in my Stable installation.

When I run this command:

cat /proc/bus/input/devices

I obtain in Apha2 version those results:

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=046d Product=404d Version=0111
N: Name="Logitech K400 Plus"
P: Phys=usb-0000:00:14.0-4:1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5
U: Uniq=
H: Handlers=sysrq kbd mouse1 event5
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
B: REL=1c3
B: ABS=100000000
B: MSC=10
B: LED=1f

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

and I obtain in Stable version those results:

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=046d Product=404d Version=0111
N: Name="Logitech K400 Plus"
P: Phys=usb-0000:00:14.0-4:1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5
U: Uniq=
H: Handlers=sysrq kbd mouse1 event5 leds
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
B: REL=1c3
B: ABS=100000000
B: MSC=10
B: LED=1f

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

Running this command in boht versions:
sudo ir-keytable -t --device=/dev/input/event3

Any of them detects the key pressing on the remote.

I have checked some pages about infrared configuration in ubuntu on internet but that is hard information to me for understanding it.

I am sorry, If I can give you more info or run more test, just ask for it.

In the meantime, till the problem with the remote/CIR receiver is solved, I let installed the ssd hard disk with the alpha2 version in order we can use easyVdr at home.

Regards.
Javier B.
CIR_Receiver.jpg
RemoteSelected.jpg
Installed_packages.zip

Oberlooser 16.Nov.2016 14:05:55

Hi Javier
What happens when you take the remote.conf and lircd.conf from the ssd
From your old installation 2.5

Is worth a try
Greetz Oberlooser

jb 16.Nov.2016 14:31:14

[quote='Oberlooser' pid='172863' dateline='1479301555']
What happens when you take the remote.conf and lircd.conf from the ssd
From your old installation 2.5

Hi Oberlooser.

I think I do not understand you.
You mean if I remove remote.conf and lircd.conf in the installation of easyvdr 3 Alpha2? What happens if I try to use the remote?
or you propose to copy those files to the installation of easyvdr 3 Stable?

[Edited: I have compared the files in both versions with the easyvdrInfo files and in Alpha2 and in the Stable version the files are equal]]

Regards.
Javier B.

Oberlooser 16.Nov.2016 15:06:43

Yes if the files are the same
I can not help you
Could be that they are different
I do not know any more
greeting
Oberlooser

jb 17.Nov.2016 09:17:25

Well. Thanks a lot anyway.

It seems that is happening the same issue that when I tried to test the Alpha4 version... see this thread: http://www.easy-vdr.de/thread-17447.html

There, michel8 tried to helpme, but I decided to wait till the Stable version, so, we did not keep on solving the issue.

The last info demanded in that thread by michel8 was:

[quote='michel8' pid='170314' dateline='1462392361']
could you please post the content of
/lib/udev/rules.d/40-ir-keytable.rules
the output of
ir-keytable -v
and the content of
/var/log/easyvdr/easyvdr-set_keytab
In the Logfile I have seen, that you are using an MCE-CIR Keyboard/Mouse, Did you also had this component in use with your last successfull remote-control configuration with Alpha 2-ISO?

Do you think that can be useful if I find out this info for the version that is working (V3 Alpha2) and for the version that is not working (V3 Stable)
in order to compare it?

May be I can check if the sofware that should be running to make work the remote is trully working? If someone could tellme which command should I use?

Regards.
Javier B.

Oberlooser 17.Nov.2016 12:20:44

Hi
What happens when you enter irw on the console and press some keys on the remote control
Is something displayed.
So you can see if the remote control sends anything and something is important.
Greetz
Helmut

gb 17.Nov.2016 13:22:54

Hi

[quote='Oberlooser' pid='172892' dateline='1479381644']
Hi
What happens when you enter irw on the console and press some keys on the remote control
Is something displayed.

Important:
vdr must run
Then test with irw

greetings Aaron

Mediacenter
easyVDR4.Alpha(Lubuntu18.04 64-Bit) Gigabyte, Ltd. H97-HD3 mit Intel(R) G3260 @ 3.30GHz 4GB DDRx,Intelgrafik,MATSHITA BD-MLT UJ265 Bluray LW, 2TB Festplatte,LCD+IRTrans-Empfänger,2x SkystarS2 PCI

[spoiler=(weitere easyVDR)]
easyVDR3.0(4.2.0 32-Bit) N4l-VM DH DualCore Asus Motherboard mit Intel(R)T2400 @1.83GHz 2GB DDR2, GT218 (rev a2), Panasonic UJ-825-B Notebook DVD Brenner adaptiert auf IDE, LCD+IRTrans-Empfänger, 250GB Samsung 840 SATA SSD 2,5",Skystar S2 DVBS2 PCI, Avermedia AVerTV A835 HD USB DVB-T (ID 07ca:b835)

jb 17.Nov.2016 13:57:01

[quote='Oberlooser' pid='172892' dateline='1479381644']

What happens when you enter irw on the console and press some keys on the remote control
Is something displayed.

Moin moin Overlooser

With the alpha2 with irw when I press a key in the remote, the pressed key is displayed on de ssh window and.... when I have changed the hard disk with the Stable version, the first start ... magically :) ... the remote worked and irw displayed also the pressed keys... but... after that I have rebooted twice or three times to test again with irw, in all of those times, irw had no response :( .

How can be it possible? Sometimes works (only one) and many times do not work.

Does this behaviour give any clue to you? I am perplexed.

Regards.
Javier B.

[Edited: I have tried many more times (7-8), but in any of them irw had any response to the key pressed on the remote]
[Edited a second time: I upload syslog since the first start when remote worked till the second reboot where remote did not work anymore in order you can see if there are something wrong or different in the logs]
syslog_firststart_and_reboots.txt

Bleifuss2 17.Nov.2016 15:26:08

Hallo Javier

What is the output from this command?

ls -l /dev/input/by-path/*

greetings

Bleifuss

Produktiv-VDR:
Board GA H77-DS3H, Intel Intel(R) Core(TM) i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J 2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0

jb 17.Nov.2016 16:19:46

[quote='Bleifuss2' pid='172895' dateline='1479392768']
What is the output from this command?
ls -l /dev/input/by-path/*

Hi Bleifuss2.

I run the command in the version alpha2, where remote works fine, and in the Stable version. I have had luck and in one of my tries the remote has been working in the stable version, so I give you the output with the Stable version with remote working and without working:

In v3 Stable (where remote does not work):

easyvdr@easyvdr:~$ ls -l /dev/input/by-path/*
lrwxrwxrwx 1 root root 10 Nov 17 16:06 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.1-event-ir -> ../event12
lrwxrwxrwx 1 root root 10 Nov 17 16:06 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.2-event-ir -> ../event13
lrwxrwxrwx 1 root root 10 Nov 17 16:06 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.3-event-ir -> ../event14
lrwxrwxrwx 1 root root 9 Nov 17 16:06 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.2-event-mouse -> ../event6
lrwxrwxrwx 1 root root 9 Nov 17 16:06 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.2-mouse -> ../mouse1
-----------------------------------------------------------------------------------------------------------------------------
In v3 Stable (this time exceptionally remote is working):

easyvdr@easyvdr:~$ ls -l /dev/input/by-path/*
lrwxrwxrwx 1 root root 10 Nov 17 16:01 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.1-event-ir -> ../event12
lrwxrwxrwx 1 root root 10 Nov 17 16:01 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.2-event-ir -> ../event13
lrwxrwxrwx 1 root root 10 Nov 17 16:01 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.3-event-ir -> ../event14
lrwxrwxrwx 1 root root 9 Nov 17 16:01 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.2-event-mouse -> ../event5
lrwxrwxrwx 1 root root 9 Nov 17 16:01 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.2-mouse -> ../mouse1
-----------------------------------------------------------------------------------------------------------------------------
In v3 Alpha2 (where remote works):
easyvdr@easyVDR:~$ ls -l /dev/input/by-path/*
lrwxrwxrwx 1 root root 10 nov 17 16:15 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.1-event-ir -> ../event12
lrwxrwxrwx 1 root root 10 nov 17 16:15 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.2-event-ir -> ../event13
lrwxrwxrwx 1 root root 10 nov 17 16:15 /dev/input/by-path/pci-0000:00:14.0-usb-0:1.3-event-ir -> ../event14
lrwxrwxrwx 1 root root 9 nov 17 16:15 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.2-event-mouse -> ../event5
lrwxrwxrwx 1 root root 9 nov 17 16:15 /dev/input/by-path/pci-0000:00:14.0-usb-0:4:1.2-mouse -> ../mouse1

Regards.
Javier B.

Bleifuss2 17.Nov.2016 21:35:39

OK

And what's the output from

cat /proc/bus/input/devices

if the remote is dead, try restart lirc.

sudo stop lircd
sudo start lircd

Produktiv-VDR:
Board GA H77-DS3H, Intel Intel(R) Core(TM) i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J 2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0

jb 17.Nov.2016 22:53:17

[quote='Bleifuss2' pid='172899' dateline='1479414939']
And what's the output from

cat /proc/bus/input/devices

Hi, the output is posted in a previous post, I copy it again:

When I run this command:

cat /proc/bus/input/devices

I obtain in Apha2 version (remote works fine) those results:

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=046d Product=404d Version=0111
N: Name="Logitech K400 Plus"
P: Phys=usb-0000:00:14.0-4:1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5
U: Uniq=
H: Handlers=sysrq kbd mouse1 event5
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
B: REL=1c3
B: ABS=100000000
B: MSC=10
B: LED=1f

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

and I obtain in Stable version (remote does not work most of times) those results:

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=046d Product=404d Version=0111
N: Name="Logitech K400 Plus"
P: Phys=usb-0000:00:14.0-4:1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5
U: Uniq=
H: Handlers=sysrq kbd mouse1 event5 leds
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
B: REL=1c3
B: ABS=100000000
B: MSC=10
B: LED=1f

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

Till monday I will not able to test your suggestion of restarting lirc, I am out of my city. I will tell you then.

Thanks and regards
Javier B.

jb 21.Nov.2016 09:30:23

[quote='Bleifuss2' pid='172899' dateline='1479414939']
if the remote is dead, try restart lirc.
sudo stop lircd
sudo start lircd

Hi again.

I have tried to restart lirc, but the remote does not work neither :( .

Which programs (software) shoud be running in order to make work the infrared port? How can I check that all of the sofware needed is running?

[Edited:]
The output of:
easyvdr@easyvdr:~$ dmesg | grep "irc"
is:
[ 6.642920] lirc_dev: IR Remote Control driver registered, major 244
[ 6.650808] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[ 17.450757] init: easyvdr-inputlirc main process (2068) killed by TERM signal
[ 17.451206] init: easyvdr-irmplircd main process (2069) killed by TERM signal
[ 17.475774] init: lircd-transmitter main process (2093) killed by TERM signal
and the output of:
easyvdr@easyvdr:~$ dmesg | grep "cir"
is:
[ 6.562763] ite_cir: Auto-detected model: ITE8713 CIR transceiver
[ 6.562767] ite_cir: Using model: ITE8713 CIR transceiver
[ 6.562769] ite_cir: TX-capable: 1
[ 6.562771] ite_cir: Sample period (ns): 8680
[ 6.562773] ite_cir: TX carrier frequency (Hz): 38000
[ 6.562774] ite_cir: TX duty cycle (%): 33
[ 6.562776] ite_cir: RX low carrier frequency (Hz): 0
[ 6.562777] ite_cir: RX high carrier frequency (Hz): 0
[ 6.650658] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input4
[ 6.650808] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[ 6.650842] ite_cir: driver has been successfully loaded

Regards.
Javier B.

jb 21.Nov.2016 14:03:45

Hi again.

As I achieved to start with the remote working 1 time of 15 this morning, I recorded an easyvdrinfo file with remote working and without working, in case some difference between them can help to solve de issue.

I upload the two files in this post.

Regards.
Javier B.
easyinfo_V3Stable_RemoteNotWorking.zip
easyinfo_V3Stable_WithRemoteWorking.zip

jb 22.Nov.2016 09:56:20

Hi. I give you more info when remote is not working:

cat /proc/bus/input/devices
returns:
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=046d Product=404d Version=0111
N: Name="Logitech K400 Plus"
P: Phys=usb-0000:00:14.0-4:1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input5
U: Uniq=
H: Handlers=sysrq kbd mouse1 event5 leds
B: PROP=0
B: EV=12001f
B: KEY=3007f 0 0 483ffff17aff32d bf54444600000000 ffff0001 130f938b17c007 ffff7bfad941dfff febeffdfffefffff fffffffffffffffe
B: REL=1c3
B: ABS=100000000
B: MSC=10
B: LED=1f

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
U: Uniq=
H: Handlers=kbd event6
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
U: Uniq=
H: Handlers=event7
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
U: Uniq=
H: Handlers=event8
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
U: Uniq=
H: Handlers=event9
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=7"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input10
U: Uniq=
H: Handlers=event10
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=8"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1f.3/sound/card0/input11
U: Uniq=
H: Handlers=event11
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

cat /etc/udev/rules.d/01-easyvdr-remote.rules
returns inside this:

#KERNELS=="input*", ATTRS{name}=="Budget-CI dvb ir receiver", SYMLINK+="input/ir-budgetCI"
#BUS=="usb", ATTRS{product}=="Griffin PowerMate", KERNEL=="event*", SYMLINK="input/powermate"
#KERNEL=="event*", SUBSYSTEM=="input", ATTRS{idVendor}=="15c2", ATTRS{idProduct}=="0034", SYMLINK+="input/touchscreen"
#KERNEL=="event*", SUBSYSTEM=="input", ATTRS{idVendor}=="0eef", ATTRS{idProduct}=="0001", SYMLINK+="input/touchscreen"
#BUS=="usb", KERNEL=="hiddev?", ATTRS{idVendor}=="0fe9", ATTRS{idProduct}=="9010", SYMLINK+="usb/DVICO"
#KERNEL=="lirc*", NAME="lirc%n", SYMLINK=="lirc%n", MODE=="0666"
KERNEL=="event*", ATTRS{name}=="ITE8713 CIR transceiver", SYMLINK+="input/ir-auto_dtc", GROUP="vdr" # inserted_by_easyvdr-detect

easyvdr@easyvdr:~$ sudo ls -l /dev/input/
returns:
Total 0
drwxr-xr-x 2 root root     80 nov 22 09:45 by-id
drwxr-xr-x 2 root root    140 nov 22 09:46 by-path
crw-r----- 1 root root 13, 64 nov 22 09:45 event0
crw-r----- 1 root root 13, 65 nov 22 09:45 event1
crw-r----- 1 root root 13, 74 nov 22 09:46 event10
crw-r----- 1 root root 13, 75 nov 22 09:46 event11
crw-r----- 1 root root 13, 76 nov 22 09:46 event12
crw-r----- 1 root root 13, 77 nov 22 09:46 event13
crw-r----- 1 root root 13, 78 nov 22 09:46 event14
crw-r----- 1 root root 13, 66 nov 22 09:45 event2
crw-r----- 1 root vdr 13, 67 nov 22 09:45 event3
crw-r----- 1 root root 13, 68 nov 22 09:45 event4
crw-r----- 1 root root 13, 69 nov 22 09:45 event5
crw-r----- 1 root root 13, 70 nov 22 09:45 event6
crw-r----- 1 root root 13, 71 nov 22 09:45 event7
crw-r----- 1 root root 13, 72 nov 22 09:45 event8
crw-r----- 1 root root 13, 73 nov 22 09:46 event9
lrwxrwxrwx 1 root root      6 nov 22 09:45 ir-auto_dtc -> event3
crw-r----- 1 root root 13, 63 nov 22 09:45 mice
crw-r----- 1 root root 13, 32 nov 22 09:45 mouse0
crw-r----- 1 root root 13, 33 nov 22 09:45 mouse1

and
easyvdr@easyvdr:~$ udevadm info -a -p $(udevadm info -q path -n /dev/input/event3)
returns
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/virtual/rc/rc0/input3/event3':
    KERNEL=="event3"
    SUBSYSTEM=="input"
    DRIVER==""

looking at parent device '/devices/virtual/rc/rc0/input3':
    KERNELS=="input3"
    SUBSYSTEMS=="input"
    DRIVERS==""
    ATTRS{name}=="ITE8713 CIR transceiver"
    ATTRS{phys}==""
    ATTRS{uniq}==""
    ATTRS{properties}=="0"

looking at parent device '/devices/virtual/rc/rc0':
    KERNELS=="rc0"
    SUBSYSTEMS=="rc"
    DRIVERS==""
    ATTRS{protocols}=="other unknown rc-5 nec jvc sony rc-5-sz sanyo sharp mce_kbd xmp "

Can that gives you an aditional clue?

Regards.
Javier B.

jb 22.Nov.2016 10:10:57

Other outputs here:

udevadm info -a -p $(udevadm info -q path -n /dev/input/event12)
returns:

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12/event12':
KERNEL=="event12"
SUBSYSTEM=="input"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12':
KERNELS=="input12"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="IR-receiver inside an USB DVB receiver"
ATTRS{phys}=="usb-0000:00:14.0-1.1/ir0"
ATTRS{uniq}==""
ATTRS{properties}=="0"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1':
KERNELS=="rc1"
SUBSYSTEMS=="rc"
DRIVERS==""
ATTRS{protocols}==" nec rc-6"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1':
KERNELS=="1-1.1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="1.1"
ATTRS{idVendor}=="2304"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="1"
ATTRS{devnum}=="4"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="500mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="0"
ATTRS{bcdDevice}=="0100"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000000M9CM1PQK"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="891213"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Pinnacle"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0237"
ATTRS{bDeviceClass}=="00"
ATTRS{product}=="PCTV 73e"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':
KERNELS=="1-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="1"
ATTRS{idVendor}=="2109"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="1"
ATTRS{devnum}=="2"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="4"
ATTRS{bcdDevice}=="9090"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 2.10"
ATTRS{urbnum}=="49"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="VIA Labs, Inc. "
ATTRS{removable}=="removable"
ATTRS{idProduct}=="2812"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="USB2.0 Hub "

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
KERNELS=="usb1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="0"
ATTRS{idVendor}=="1d6b"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{authorized_default}=="1"
ATTRS{busnum}=="1"
ATTRS{devnum}=="1"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="12"
ATTRS{interface_authorized_default}=="1"
ATTRS{bcdDevice}=="0404"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000:00:14.0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="108"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0002"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="xHCI Host Controller"

looking at parent device '/devices/pci0000:00/0000:00:14.0':
KERNELS=="0000:00:14.0"
SUBSYSTEMS=="pci"
DRIVERS=="xhci_hcd"
ATTRS{irq}=="122"
ATTRS{subsystem_vendor}=="0x8086"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x0c0330"
ATTRS{driver_override}=="(null)"
ATTRS{consistent_dma_mask_bits}=="64"
ATTRS{dma_mask_bits}=="64"
ATTRS{local_cpus}=="f"
ATTRS{device}=="0x9d2f"
ATTRS{enable}=="1"
ATTRS{msi_bus}=="1"
ATTRS{local_cpulist}=="0-3"
ATTRS{vendor}=="0x8086"
ATTRS{subsystem_device}=="0x2063"
ATTRS{numa_node}=="-1"
ATTRS{d3cold_allowed}=="1"

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

udevadm info -a -p $(udevadm info -q path -n /dev/input/event13)
returns:
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13/event13':
KERNEL=="event13"
SUBSYSTEM=="input"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13':
KERNELS=="input13"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="IR-receiver inside an USB DVB receiver"
ATTRS{phys}=="usb-0000:00:14.0-1.2/ir0"
ATTRS{uniq}==""
ATTRS{properties}=="0"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2':
KERNELS=="rc2"
SUBSYSTEMS=="rc"
DRIVERS==""
ATTRS{protocols}==" nec rc-6"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2':
KERNELS=="1-1.2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="1.2"
ATTRS{idVendor}=="2304"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="1"
ATTRS{devnum}=="6"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="500mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="0"
ATTRS{bcdDevice}=="0100"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000000M8CI1LE9"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="888347"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Pinnacle"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0237"
ATTRS{bDeviceClass}=="00"
ATTRS{product}=="PCTV 73e"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':
KERNELS=="1-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="1"
ATTRS{idVendor}=="2109"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="1"
ATTRS{devnum}=="2"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="4"
ATTRS{bcdDevice}=="9090"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 2.10"
ATTRS{urbnum}=="49"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="VIA Labs, Inc. "
ATTRS{removable}=="removable"
ATTRS{idProduct}=="2812"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="USB2.0 Hub "

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
KERNELS=="usb1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="0"
ATTRS{idVendor}=="1d6b"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{authorized_default}=="1"
ATTRS{busnum}=="1"
ATTRS{devnum}=="1"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="12"
ATTRS{interface_authorized_default}=="1"
ATTRS{bcdDevice}=="0404"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000:00:14.0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="108"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0002"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="xHCI Host Controller"

looking at parent device '/devices/pci0000:00/0000:00:14.0':
KERNELS=="0000:00:14.0"
SUBSYSTEMS=="pci"
DRIVERS=="xhci_hcd"
ATTRS{irq}=="122"
ATTRS{subsystem_vendor}=="0x8086"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x0c0330"
ATTRS{driver_override}=="(null)"
ATTRS{consistent_dma_mask_bits}=="64"
ATTRS{dma_mask_bits}=="64"
ATTRS{local_cpus}=="f"
ATTRS{device}=="0x9d2f"
ATTRS{enable}=="1"
ATTRS{msi_bus}=="1"
ATTRS{local_cpulist}=="0-3"
ATTRS{vendor}=="0x8086"
ATTRS{subsystem_device}=="0x2063"
ATTRS{numa_node}=="-1"
ATTRS{d3cold_allowed}=="1"

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

udevadm info -a -p $(udevadm info -q path -n /dev/input/event14)
returns:

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

looking at device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14/event14':
KERNEL=="event14"
SUBSYSTEM=="input"
DRIVER==""

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14':
KERNELS=="input14"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="IR-receiver inside an USB DVB receiver"
ATTRS{phys}=="usb-0000:00:14.0-1.3/ir0"
ATTRS{uniq}==""
ATTRS{properties}=="0"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3':
KERNELS=="rc3"
SUBSYSTEMS=="rc"
DRIVERS==""
ATTRS{protocols}==" nec rc-6"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3':
KERNELS=="1-1.3"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="1.3"
ATTRS{idVendor}=="2304"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="1"
ATTRS{devnum}=="8"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="500mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="0"
ATTRS{bcdDevice}=="0100"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000000M09S0BEU"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="919865"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Pinnacle"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0237"
ATTRS{bDeviceClass}=="00"
ATTRS{product}=="PCTV 73e"

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1/1-1':
KERNELS=="1-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="1"
ATTRS{idVendor}=="2109"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="1"
ATTRS{devnum}=="2"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="4"
ATTRS{bcdDevice}=="9090"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 2.10"
ATTRS{urbnum}=="49"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="VIA Labs, Inc. "
ATTRS{removable}=="removable"
ATTRS{idProduct}=="2812"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="USB2.0 Hub "

looking at parent device '/devices/pci0000:00/0000:00:14.0/usb1':
KERNELS=="usb1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="0"
ATTRS{idVendor}=="1d6b"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{authorized_default}=="1"
ATTRS{busnum}=="1"
ATTRS{devnum}=="1"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="12"
ATTRS{interface_authorized_default}=="1"
ATTRS{bcdDevice}=="0404"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000:00:14.0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="108"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Linux 4.4.0-45-generic xhci-hcd"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0002"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="xHCI Host Controller"

looking at parent device '/devices/pci0000:00/0000:00:14.0':
KERNELS=="0000:00:14.0"
SUBSYSTEMS=="pci"
DRIVERS=="xhci_hcd"
ATTRS{irq}=="122"
ATTRS{subsystem_vendor}=="0x8086"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x0c0330"
ATTRS{driver_override}=="(null)"
ATTRS{consistent_dma_mask_bits}=="64"
ATTRS{dma_mask_bits}=="64"
ATTRS{local_cpus}=="f"
ATTRS{device}=="0x9d2f"
ATTRS{enable}=="1"
ATTRS{msi_bus}=="1"
ATTRS{local_cpulist}=="0-3"
ATTRS{vendor}=="0x8086"
ATTRS{subsystem_device}=="0x2063"
ATTRS{numa_node}=="-1"
ATTRS{d3cold_allowed}=="1"

looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""

ps aux | grep "lircd"
returns
root 2247 0.0 0.0 33112 3868 ? Ss 10:39 0:00 /usr/sbin/lircd -n --output=/var/run/lirc/lircd --driver=devinput --device=/dev/input/ir-auto_dtc

Javier B.

Bleifuss2 23.Nov.2016 08:49:13

Hello Javier

First we musst check what's the right event, and if it work's allways.
You can test with this command:

sudo cat /dev/input/event3

If you press a button on the remote control you must see any output on the terminal.

I'm not sure that event3 ist the right event.

Here can you look for the event number:

H: Handlers=sysrq kbd mouse0 event4

I: Bus=0019 Vendor=1283 Product=0000 Version=0000
N: Name="ITE8713 CIR transceiver"
P: Phys=
S: Sysfs=/devices/virtual/rc/rc0/input3
U: Uniq=
H: Handlers=kbd event3
B: PROP=0
B: EV=100013
B: KEY=fff 0 108fc326 217604100000000 0 118000 418000000801 9e968000000000 10000000
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="MCE IR Keyboard/Mouse (ite-cir)"
P: Phys=/input0
S: Sysfs=/devices/virtual/input/input4
U: Uniq=
H: Handlers=sysrq kbd mouse0 event4
B: PROP=0
B: EV=100017
B: KEY=30000 7 ff87207ac14057ff febeffdfffefffff fffffffffffffffe
B: REL=3
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.1/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/rc/rc1/input12
U: Uniq=
H: Handlers=kbd event12
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.2/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/rc/rc2/input13
U: Uniq=
H: Handlers=kbd event13
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

I: Bus=0003 Vendor=2304 Product=0237 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:14.0-1.3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/rc/rc3/input14
U: Uniq=
H: Handlers=kbd event14
B: PROP=0
B: EV=100013
B: KEY=14afc336 284284d00000000 0 480058000 219040000801 9e96c000000000 90020000000ffc
B: MSC=10

Good luck

Bleifuss

Produktiv-VDR:
Board GA H77-DS3H, Intel Intel(R) Core(TM) i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J 2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0

jb 23.Nov.2016 10:17:01

Hi.

I have tested the whole bunch of events, with no luck in any of them:
easyvdr@easyvdr:~$ sudo cat /dev/input/event3
password for easyvdr:
easyvdr@easyvdr:~$ irw
easyvdr@easyvdr:~$ sudo cat /dev/input/event12
easyvdr@easyvdr:~$ sudo cat /dev/input/event13
easyvdr@easyvdr:~$ sudo cat /dev/input/event14
easyvdr@easyvdr:~$ sudo cat /dev/input/event2
easyvdr@easyvdr:~$ sudo cat /dev/input/event4
easyvdr@easyvdr:~$ sudo cat /dev/input/event5
easyvdr@easyvdr:~$ sudo cat /dev/input/event6
easyvdr@easyvdr:~$ sudo cat /dev/input/event7
easyvdr@easyvdr:~$ sudo cat /dev/input/event8
easyvdr@easyvdr:~$ sudo cat /dev/input/event9
easyvdr@easyvdr:~$ sudo cat /dev/input/event10
easyvdr@easyvdr:~$ sudo cat /dev/input/event11
easyvdr@easyvdr:~$ sudo cat /dev/input/event0
easyvdr@easyvdr:~$ sudo cat /dev/input/event1
easyvdr@easyvdr:~$ sudo cat /dev/input/event3
easyvdr@easyvdr:~$ sudo cat /dev/input/ir-auto_dtc
easyvdr@easyvdr:~$ sudo cat /dev/input/mice
easyvdr@easyvdr:~$ sudo cat /dev/input/mouse0
easyvdr@easyvdr:~$ sudo cat /dev/input/mouse1

Those commands did not return anything when I pressed the remote keys.

Regards.
Javier B.

jb 23.Nov.2016 10:27:19

Hi again.

May be I just have found out what is happening.

After booting, I have connected by ssh and I have run those commands:

easyvdr@easyvdr:~$ sudo modprobe -r ite_cir
easyvdr@easyvdr:~$ sudo modprobe ite_cir

And... the remote started working as it should be.

Someone has any idea about how to make the solution persistent after reboot?

Thanks and regards
Javier B.

Bleifuss2 23.Nov.2016 14:22:14

Someone has any idea about how to make the solution persistent after reboot?

OK that's no Problem, but where is the error?

Please post this file form both installations:

/etc/lirc/hardware.conf

Produktiv-VDR:
Board GA H77-DS3H, Intel Intel(R) Core(TM) i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J 2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0

jb 24.Nov.2016 09:22:31

[quote='Bleifuss2' pid='173023' dateline='1479907334']
Please post this file form both installations:

/etc/lirc/hardware.conf

Hi.

Here you have. But they seem equals in both systems.

Regards.
Javier B.
hardware.conf_easyVdr3-Alpha2.txt
hardware.conf_easyVdr3-Stable.txt

Bleifuss2 25.Nov.2016 19:19:41

Hello Javier

I think you need a workaround ...

sudo su
echo modprobe -r ite_cir >/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
echo modprobe ite_cir >>/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
chmod ugo+x /usr/share/vdr/before-vdr-hooks/1-reloadite_cir

I hope it works

Thank you for your help

Regards

Bleifuss

Produktiv-VDR:
Board GA H77-DS3H, Intel Intel(R) Core(TM) i5-3470, Cine S2 DVB, WD 3TB Green, WDC WD20EARS-00J 2TB, Geforce 750Ti oder Intel HD
Easyvdr 3.0

jb 26.Nov.2016 14:09:20

[quote='Bleifuss2' pid='173088' dateline='1480097981']
I think you need a workaround ...
sudo su
echo modprobe -r ite_cir >/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
echo modprobe ite_cir >>/usr/share/vdr/before-vdr-hooks/1-reloadite_cir
chmod ugo+x /usr/share/vdr/before-vdr-hooks/1-reloadite_cir

Hi, Bleifuss2.
With this workaround easyvdr starts till the screen with the easyvdr boot logo. Remote works, but I can not whatch tv. I only can change to Kodi with pChanger, but if I try to return to vdr, nothing is showed.

I tried this workaround also, and it seem to work. I added in "/etc/rc.local" this:
sleep 3
modprobe -r ite_cir
sleep 2
modprobe ite_cir

But I do not know if this workaround is permanent, can you tell me if it can be erased/restored (rc.local) after some update?

Thanks a lot and regards.
Javier B.

Oberlooser 26.Nov.2016 19:12:33

Hello
Nice that it is now with you running
For whoever gave up has already lost
greeting
Oberlooser
K +

mango 26.Nov.2016 19:35:52

Hi Javier,

But I do not know if this workaround is permanent, can you tell me if it can be erased/restored (rc.local) after some update?
rc.local is permanent - after upgrade will not erased!

Regards
Wolfgang

[spoiler="My VDR Stuff"]DVB-S/S2: Silverstone LC17 mit 8,4" TFT Display, ASUS P5KPL SE, E6300, 2GB, NT-Fanlees, System SSD 40GB, Media 2TB, GT630, DVD-LG, SkyStar S2, Nova-T, FB X10 Medion-Scroll, "Arch-Linux - VDR 2.3.8"
Test-VDR: ASRock ALiveNF6G, AMD X2 3800+ (35W),4GB, GT 630 - nvidia-384, SSD 64GB, SkyStar S2, Cinergy T RC USB, easyVDR 3.5(Kernel-4.4.0) - VDR-2.3.8 - KODI-18.0 - FB X10 Medion-Scroll
Client: Evo N600c, Puppy-Slacko 6.3 - VDR-2.2.0 - FB X10 Medion_OR25V
Spielwiese: RPI2 als Client mit LibreELEC-9.80-Milhouse(Kodi-19.0) - MLD-5.4 VDR2VDR

	Kopie des easyVDR-Forums zum Nachschlagen
	Wiki Doku-Archiv Downloads Ubuntu-Pakete Sourcecode Hilfe